ISPSoft User Manual

ISPSoft User Manual
3.3 Setting the Parameters in an AH500 Series CPU
Module
3.3.1 Opening the PLC Parameter Setting Window
After users double-click the CPU module in the system configuration area, the PLC Parameter
Setting window will appear. The parameters which can be set vary with the models of the CPU
modules.
Before the parameters in a CPU module are set, users have to refer to the operation
manual for the CPU module. To prevent damage to the system or staff, the users have to
make sure of the effect that the parameters which are set have on the CPU module and
the whole system.
The parameters are classified into several types. The users can click the primary tabs at the top of
the window, and the secondary tables at the bottom of the window to set the parameters.
3-33