ISPSoft User Manual

ISPSoft User Manual
system configuration area, it will be under the present racks. If an extension rack is pasted on a
present extension rack, it will be put above the present extension rack.
• Method 1
Right-click the blank or a present rack in the system configuration area, and then click Paste on
the context menu.
• Method 2
Click the blank or a present rack in the system configuration area, and then click Paste on the
Edit menu, or
on the toolbar.
Additional remark
When an extension rack is cut/pasted, the parameters in the modules on the extension rack are
processed as follows.
• Input/Output device range: The input/output devices assigned to the modules on the extension
rack cut are automatically assigned to the modules on the extension
rack pasted.
• Comments about the modules: The comments about the modules on the extension rack cut are
copied into the modules on the extension rack pasted.
• Parameters in the modules: The parameters in the modules on the extension rack cut are
copied into the modules on the extension rack pasted.
• Data registers: The data registers assigned to the modules on the extension rack cut are
automatically assigned to the modules on the extension rack pasted.
• Parameters in the intelligent modules: The setting of the parameters in the intelligent modules
is copied.
When an extension rack is copied/pasted, the parameters in the modules on the extension rack are
processed as follows.
• Input/Output device range: The input/output device addresses assigned to the modules on the
3-31