ISPSoft User Manual

Chapter 3 Configuring and Setting a PLC System
3.2.2.5 Replacing a Module
(1) Right-click a module which will be replaced in the system configuration area or on the
information list. (The CPU module and the power supply module can not be replaced.)
(2) Point to Replace on the context menu, and then click Sam Type or All.
‣ Same Type
A module selected is replaced by a same type of module. After the module is replaced, the
input/output devices assigned to the new module are the same as the input/output devices
assigned to the module replaced. Besides, if the parameters in the new module are not the
same as the parameters in the module replaced, the setting of the parameters in the new
module will be restored to the default values.
‣ All
A module selected can be replaced by any type of module. After the module is replaced, the
different input/output devices will be assigned to the new module, and the setting of the
parameters in the new module will be restored to the default values.
(3) After users click Same Type or All, the Module Selection window will appear. Items which
can be selected will be displayed in the window. After the users decide on a module, they can
double-click the module in the window.
3-18