ISPSoft User Manual

ISPSoft User Manual
• Multiple nodes
The parameters related to an Ether Link in all the nodes are uploaded. Before the users upload
the related parameters, they have to make sure that all the PLCs and all the modules are
connected to an Ethernet network, and can connect to NWCONFIG through Ethernet. The
connection type that the driver selected in the Driver Name drop-down list box in the Select a
Driver window uses must be Ethernet, otherwise the related parameters can not be uploaded.
Please refer to section 16.1.3 for more information.
‣ Method 1
Click the PLC menu, point to Transfer, and click Upload (Multiple PLCs). The users can also
download the related parameters by clicking on the toolbar.
‣ Method 2
Select All Nodes on the node list, right-click
the context menu.
All Nodes, and click Upload (Multiple PLCs) on
Additional remark
After the parameters which include a node not configured in NWCONFIG are uploaded, the node
which is not configured in NWCONFIG will be called an asynchronous device, and will be in red. If
the setting of an Ether Link includes an asynchronous device, the system does not allow the Ether
Link to be monitored, and it does not allow the parame ters related to the Ether Link to be
downloaded.
16-69