ISPSoft User Manual

ISPSoft User Manual
• Multiple nodes
The data demanding setting related to all the nodes, and the start modes of all the nodes are
downloaded. Before the users download the related parameters, they have to make sure that all
the PLCs and all the modules are connected to an Ethernet network, and can connect to
NWCONFIG through Ethernet. The connection type that the driver selected in the Driver Name
drop-down list box in the Select a Driver window uses must be Ethernet, otherwise the related
parameters can not be downloaded. Please refer to section 16.1.3 for more information.
‣ Method 1
Click the PLC menu, point to Transfer, and click Download (Multiple PLCs). The users can
also download the related parameters by clicking on the toolbar.
‣ Method 2
Select All Nodes on the node list, right-click All Nodes, and click Download (Multiple PLCs)
on the context menu.
Additional remark
If the parameters set include a node which does not demand any data, the node will not demand
any data through the network specified after the parameters are downloaded to multiple nodes.
16-67