ISPSoft User Manual

Chapter 2 Starting and Setting
Number column, and the Comment column.
Users can type the IP address of a device connected in this column.
Users can type a communication port number specified. If it is not necessary to specify a
communication port number, please use the default communication port number 502.
Users can type a comment in this column.
No device will be displayed in this column even if a device is found.
‣ After users select an IP address, they can click Del or press DEL on the keyboard to delete
the IP address from the list.
(5) Users can select the number of times the sending of a command is retried if a connection error
occurs in the Time of Auto-retry box, and select an interval of retrying the sending of a
command in the Time Interval of Auto-retry box.
*. When the Driver Properties window is opened, the information about the network interface cards in the computer
is retrieved once. However, the information in the Description drop-down list box will not be updated. If a network
interface card is added to the computer system after the Driver Properties window is opened, the network
interface card will not be displayed in the Description drop-down list box. Users have to close the Driver
Properties window, and open it again.
2.4.3.6 Setting Communication Parameters for a DVP Simulator
(1) Users can type a driver name in the Driver Name box. Special marks can not be used except
_.
(2) Select DVP Simulator in the Type drop-down list box in the Connection Setup section.
(3) Users can select the number of times the sending of a command is retried if a connection error
occurs in the Time of Auto-retry box, and select an interval of retrying the sending of a
command in the Time Interval of Auto-retry box.
2.4.3.7 Setting Communication Parameters for a AH Simulator
(1) Users can type a driver name in the Driver Name box. Special marks can not be used except
2-43