ISPSoft User Manual

ISPSoft User Manual
communication port number, please use the default communication port number 502.
Users can type a comment in this column.
Users can not type a device in this column. After users click Search, a device which is
found is displayed in this column.
‣ After users select an IP address, they can click Del or press DEL on the keyboard to delete
the IP address from the list.
(5) Users can select the number of times the sending of a command is retried if a connection error
occurs in the Time of Auto-retry box, and select an interval of retrying the sending of a
command in the Time Interval of Auto-retry box.
*. When the Driver Properties window is opened, the information about the network interface cards in the computer
is retrieved once. However, the information in the Description drop-down list box will not be updated. If a network
interface card is added to the computer system after the Driver Properties window is opened, the network
interface card will not be displayed in the Description drop-down list box. Users have to close the Driver
Properties window, and open it again.
2.4.3.5 Setting Communication Parameters for DirectLink (Ethernet)
(1) Users can type a driver name in the Driver Name box. Special marks can not be used except
_.
(2) Select DirectLink (Ethernet) in the Type drop-down list box in the Connection Setup section.
(3) Select a network interface card in the Description drop-down list box. An IP address assigned
to a network interface card selected is displayed in the lower left corner of the Ethernet Card
section.
(4) Owing to the characteristics of Ethernet, a computer can communicate with all devices on a
network. Users can create the IP addresses of devices connected to this driver in the IP
Address Setting section.
‣ Delta human-machine interfaces support the Search function. After users click Search to
search for IP addresses, results are displayed in the IP Address Setting section.
‣ After users click Add to add a new IP address to the list of IP addresses in the IP Address
Setting section, they can type related information in the IP Address section, the Port
2-42