ISPSoft User Manual

ISPSoft User Manual
address or RS-485 station address are assigned to the ports connected, and what the values
of RS-485 communication parameters are. Besides, the users have to decide what devices
perform data exchange. The data exchange is related to the programs in the PLCs used in the
networks. After the users design networks, they can create the networks in ISPSoft.
(2) Create a project in ISPSoft. If there are more than two Delta PLCs in a system, it is
recommended that the users should create a group of projects in ISPSoft. Please refer to
section 2.2 for more information.
(3) If there are projects for AH500 series CPU modules, the users have to open the HWCONFIG
windows in the projects, and complete hardware configurations. The users have to configure
modules, set the parameters in network modules, gives names to the CPU modules, set ports,
and set Ethernet ports. Please refer to chapter 3 for more information.
16-9