ISPSoft User Manual

Chapter 15 Password Management and Data Protection
a DVP series PLC, the Program Copy to PCC01 checkbox will appear in the Project Password
Setting window.
If the project is not protected by a project password, there will be two boxes used to set a project
password in the Project Password Setting window. If the users want to set a project password,
they have to type the same password in the two boxes, and click OK. The users can only type
English letters, numerical digits, and spaces in the window. A project password is case-sensitive.
Besides, the limit on the number of characters which can be typed depends on the model selected.
The users have to type a project password according to the hint in the window.
If the users want to limit the total number of password guesses that can be made, they can select
the Enable Limited Times checkbox, and select a number in the box at the right side of the
checkbox. If users want to copy the program into DVPPCC01, they can select the Program Copy to
PCC01 checkbox. (Please refer the additional remark below for more information.)
After the users set a project password, the project will be protected by the project password. The
window will be closed after the users click Cancel.
15-5