ISPSoft User Manual

ISPSoft User Manual
(1) Type a driver name in the Driver Name box.
(2) Select AH Simulator in the Type drop-down list box in the Connection Setup section.
(3) Users can type a communication port number in the Port Number box. If it is not necessary to
specify a communication port number, please use the default communication port number.
Besides, if several AH simulators are created, the communication port numbers assigned to
the AH simulators can not be the same, and the system skips the port numbers which have
been specified.
(4) Users can select the number of times the sending of a command is retried if a connection error
occurs in the Time of Auto-retry box, and select an interval of retrying the sending of a
command in the Time Interval of Auto-retry box.
Open the COMMGR window, and then start an AH simulator in COMMGR. After the AH simulator is
started, a window will appear. The title of the window is the driver name of the AH simulator. Besides,
users are allowed to create several AH simulators, but eight AH simulators at most can be started
simultaneously.
Click Communication Settings… on the Tools menu in ISPSoft, select the AH simulator in the
Driver box in the Communication Setting window, and click OK. After the communication setting is
14-24