ISPSoft User Manual

Chapter 14 Test Tools and Debugging Tools
(1) Type a driver name in the Driver Name box.
(2) Select DVP Simulator in the Type drop-down list box in the Connection Setup section.
(3) Users can select the number of times the sending of a command is retried if a connection error
occurs in the Time of Auto-retry box, and select an interval of retrying the sending of a
command in the Time Interval of Auto-retry box.
*. Users can only create a DVP simulator in COMMGR. If users want to create the second DVP simulator, a warning
message will appear.
14.2.2 Starting the DVP Simulator
Open the COMMGR window, and then start the DVP simulator in COMMGR.
Click Communication Settings… on the Tools menu in ISPSoft, select the DVP simulator in the
Driver box in the Communication Setting window, and click OK.
14-19