ISPSoft User Manual
ISPSoft User Manual ISPSoft User Manual
Chapter 2 Starting and Setting After a PMSoft project is imported into an ISPSoft project, the PMSoft project will be copied and saved in a folder in which the ISPSoft project is saved, and the original PMSoft project is still saved in the original folder. Besides, a PMSoft project which is imported must be a file created with PMSoft version 2.05 or above, and a project for a DVP-PM series PLC is not supported. • Changing a slot number If users want to change the slot number in a project, they have to right-click the project, point to Motion Module in the context menu, and click Change Slot No.. Users have to select a slot number in the Slot No. drop-down list box in the New Motion Module window. They can not select a slot number which has been selected. Finally, click OK. 2-29
ISPSoft User Manual 2.3 Basic Setting in ISPSoft 2.3.1 System Setting and Environment Setting Users can select a language in the Language drop-down list box on the Tools menu. After users click Options… on the Tools menu, the Options window will appear. The users can click the items at the left side of the window, and the tabs at the top of the window. 2-30
- Page 2 and 3: ISPSoft User Manual Preface ISPSoft
- Page 4 and 5: Chapter 1 Introduction of the Softw
- Page 6 and 7: Chapter 1 Introduction of the Softw
- Page 8 and 9: Chapter 1 Introduction of the Softw
- Page 10 and 11: Chapter 1 Introduction of the Softw
- Page 12 and 13: Chapter 1 Introduction of the Softw
- Page 14 and 15: Chapter 2 Starting and Setting Tabl
- Page 16 and 17: Chapter 2 Starting and Setting Afte
- Page 18 and 19: Chapter 2 Starting and Setting Win
- Page 20 and 21: Chapter 2 Starting and Setting •
- Page 22 and 23: Chapter 2 Starting and Setting •
- Page 24 and 25: Chapter 2 Starting and Setting they
- Page 26 and 27: Chapter 2 Starting and Setting •
- Page 28 and 29: Chapter 2 Starting and Setting *1.
- Page 30 and 31: Chapter 2 Starting and Setting User
- Page 32 and 33: Chapter 2 Starting and Setting File
- Page 34 and 35: Chapter 2 Starting and Setting Afte
- Page 36 and 37: Chapter 2 Starting and Setting •
- Page 38 and 39: Chapter 2 Starting and Setting Afte
- Page 40 and 41: Chapter 2 Starting and Setting In t
- Page 44 and 45: Chapter 2 Starting and Setting •
- Page 46 and 47: Chapter 2 Starting and Setting •
- Page 48 and 49: Chapter 2 Starting and Setting *. I
- Page 50 and 51: Chapter 2 Starting and Setting Afte
- Page 52 and 53: Chapter 2 Starting and Setting ‣
- Page 54 and 55: Chapter 2 Starting and Setting 2.4.
- Page 56 and 57: Chapter 2 Starting and Setting Numb
- Page 58 and 59: Chapter 2 Starting and Setting they
- Page 60 and 61: Chapter 2 Starting and Setting (5)
- Page 62 and 63: Chapter 2 Starting and Setting Addi
- Page 64 and 65: Chapter 3 Configuring and Setting a
- Page 66 and 67: ISPSoft User Manual By means of the
- Page 68 and 69: ISPSoft User Manual (6) If the user
- Page 70 and 71: ISPSoft User Manual 3.2 Hardware Co
- Page 72 and 73: ISPSoft User Manual All hardware av
- Page 74 and 75: ISPSoft User Manual • Method 3 (1
- Page 76 and 77: ISPSoft User Manual • AH16AM10N-5
- Page 78 and 79: ISPSoft User Manual *. Please refer
- Page 80 and 81: ISPSoft User Manual 3.2.2.4 Deletin
- Page 82 and 83: ISPSoft User Manual 3.2.2.6 Searchi
- Page 84 and 85: ISPSoft User Manual *. If the Repla
- Page 86 and 87: ISPSoft User Manual There are two w
- Page 88 and 89: ISPSoft User Manual • Method 2 (1
- Page 90 and 91: ISPSoft User Manual *. An extension
Chapter 2 Starting and Setting<br />
After a PMSoft project is imported into an <strong>ISPSoft</strong> project, the PMSoft project will be copied and<br />
saved in a folder in which the <strong>ISPSoft</strong> project is saved, and the original PMSoft project is still<br />
saved in the original folder. Besides, a PMSoft project which is imported must be a file created<br />
with PMSoft version 2.05 or above, and a project for a DVP-PM series PLC is not supported.<br />
• Changing a slot number<br />
If users want to change the slot number in a project, they have to right-click the project, point to<br />
Motion Module in the context menu, and click Change Slot No..<br />
<strong>User</strong>s have to select a slot number in the Slot No. drop-down list box in the New Motion Module<br />
window. They can not select a slot number which has been selected. Finally, click OK.<br />
2-29