ISPSoft User Manual

ISPSoft User Manual
*. Please refer to PMSoft User Manual for more information about the usage of PMSoft. If PMSoft is started
through ISPSoft, users can not create a new file, open an old file, and change a model in PMSoft. Besides, users
must save a program written in PMSoft by clicking Save on the File menu in PMSoft.
• Deleting a PMSoft project
If users want to delete a project for a motion control module, they can right-click a project they
want to delete in the project management area, point to Motion Module on the context menu,
and click Remove Motion Module. After a project for a motion control module is deleted, it will be
removed from the list of projects in the project management area, and will not be deleted from the
original folder in which it is saved.
• Importing a PMSoft project
If users want to import a PMSoft project (a ppm file) which was created previously to an ISPSoft
project, they have to right-click Motion Module in the project management area, point to Motion
Module on the context menu, and click Add Existed Motion Module.
Users have to select a PMSoft project which they want to import in the Open Project window, and
click Open. The slot number in a PMSoft project imported is undefined.
2-28