ISPSoft User Manual

ISPSoft User Manual
Network numbers are marked on the networks in a ladder diagram. The color at the left side of a
network indicates the state of the network. A network can be activated or inactivated, and a network
can be selected or unselected. Users can select colors which will be shown at the left sides of the
networks in a ladder diagram in the Options window in ISPSoft. Please refer to section 2.3.1 for
more information.
The network is unselected
and activated.
The network is unselected
and inactivated.
The network is selected
and activated.
The network is selected
and inactivated.
After a new window in which a ladder diagram will be created is opened, the system will insert a
blank network in the window. If users want to add a network, they can select a network, and click
on the toolbar. The network added will be under the network selected.
If users click
on the toolbar, a blank network will be put above the network selected.
9.1.4 Selecting Objects
The red frame in the working area indicates the objects which are edited. It also indicates the
objects which are selected. If users want to edit he program in the figure below, they can only select
the positions marked with red frames. Besides, the functions which can be used vary with the
position selected. The objects which are copied/cut/pasted/deleted depend on the position selected.
The positions which are marked with red frames in the figure are described below.
9-4