ISPSoft User Manual

ISPSoft User Manual
(2) Click or on the toolbar, move the mouse cursor to a position near the output object,
and then click the left mouse button.
(3) Create multiple outputs according to the description above.
8.2.8 Putting a Label
If users want to use a jump instruction, they have to put a label on the network to which the
execution of the program jumps. A label is put at the right side of a network number. Besides, if the
project created is a project for a DVP series PLC, the label put on a network must be a P device.
The P devices in an AH500 series CPU module are automatically assigned by the system, and can
not be used by users. If the project created is a project for an AH500 series CPU module, the label
symbol users type must be a unique label. The label symbol users type in a project for an AH500
series CPU module does not need to be declared in a symbol table. Please refer to user manuals for
more information about P devices.
If users want to specify a label in an instruction, they do not have to type a colon in front of the label.
8-16