ISPSoft User Manual

ISPSoft User Manual
After the assignment of the POUs to Cyclic (0) is complete, users can arrange the POUs in the
Assigned POUs section. Owing to the fact that Control and Time_CHK must be executed earlier
than Signal, the order in which Control, Time_CHK, and Signal are listed in the Assigned
POUs section is ControlTime_CHKSignal.
Select Cyclic (1) in the Task Type section. Owing to the fact that Cyclic (1) will be disabled after
the first scan cycle is complete, the Active checkbox is selected.
Assign Initialize to Cyclic (1). Owing to the fact that there is only one POU in the Assigned
POUs section, the users do not need to arrange the POU.
Select Timed Interruption 0 (252) in the Task Type section. The message in the Task
Description section indicates that the condition of Timed Interruption 0 (252) can be set in
HWCONFIG. The users have to assign a POU to this task, and set the property of this task.
5-40