ISPSoft User Manual

Chapter 5 Program Organization Units and Tasks
*. The applied instruction DMOV is in the Data Transfer section.
Open the Task Manager window after the writing of the program is complete. Owing to the fact
that the five POUs are assigned to Cyclic (0) when they are created, the five POUs are in the
Assigned POUs section for Cyclic (0).
Set the property of Cyclic (0) first. Owing to the fact that Cyclic (0) is enabled by Initialize, the
Active checkbox is unselected.
INT_Timer must be assigned to Timed Interruption (0), and Initialize must be assigned to
Cyclic (1). As a result, INT_Timer and Initialize are removed from the Assigned POUs section
for Cyclic (0).
5-39