ISPSoft User Manual

Chapter 5 Program Organization Units and Tasks
This part of the program functions to start or stop the system.
This part of the program functions to inject the glue.
This part of the program functions to count the parts which are conveyed.
This section aims at the architecture of a program. The contents related to configuring hardware,
setting parameters, testing a program, and debugging a program are the same as the contents of
chapter 4. Users can try to complete the related setting by themselves.
First, create a new project. Then, refer to chapter 4, and complete the hardware configuration.
Finally, refer to section 5.4.1, and create three POUs in the Programs section in accordance with
the three points listed above. These three POUs are assigned to Cyclic (0).
5-25