ISPSoft User Manual

ISPSoft User Manual
*1. Users can disable a POU by removing it from the original task section. However, if the users want to execute the
POU later, they have to assign the POU to the original task again, and rearrange the POUs in the task section. As
a result, it is more convenient for the users to disable the POU temporarily by unselecting the Active box in the
window.
*2. A POU can be enabled not only by selecting the Active box in the window, but also by the task management tool.
Please refer to section 5.5.3 for more information.
5.4.3 Deleting and Copying a POU
If users want to delete a POU, they have to right click the POU, point to POU on the context menu,
and click Delete.
The POU can not be recovered after it is deleted. The POU will be deleted from the project after OK
is clicked. If the POU deleted is a POU of the program type, they system will also delete it from the
task section.
If users want to copy a POU, they have to right-click the POU, point to POU, and click Copy.
5-12