ISPSoft User Manual

Chapter 4 Quick Start
If users want to change the value in a device, they can click the device, right-click the device, click
Change Present Value on the context menu, and set a present value in the Enter Present Value
window.
The Enter Present Value window is described below.
Message
Users can type a value in the Present Value box.
Name of a device or a symbol whose present value will be changed
Users can type a 16-bit value or a 32-bit value.
Value change history (Format: Device name Value)
In the binary mode, users can set the states of the bits through the mouse.
The setting values will be applied after OK is clicked. The window will be closed after Cancel is
clicked.
Users can display or hide the binary mode.
In this example, X0.0~X0.15 and Y0.0~Y0.15 are input devices and output devices assigned to the
digital I/O module AH16AP11R-5A. After the parameters in the hardware are downloaded to the
CPU module, the states of X0.0~X0.15 will be the same as the states of the inputs on the actual
module. Even if users set X0.0~X0.15 to ON or OFF in the program editing window, the states of
X0.0~X0.15 will be updated by the actual input signals.
4-31