ISPSoft User Manual

ISPSoft User Manual
(3) After the users click Download on the Option menu, or on the toolbar, the Transfer
Items window will appear. The hardware configuration will be downloaded to the CPU
module after OK is clicked.
(4) After the hardware configuration is downloaded to the CPU module successfully, the BUS
FAULT LED indicator on the CPU module will be OFF. The users can close the HWCONFIG
window. If the BUS FAULT LED indicator on the CPU module is still ON or blinking, the CPU
module is in an abnormal state. Please make sure that the actual hardware configuration is
the same as the hardware configuration in the HWCONFIG window again, or refer to the
operation manual for more information about eliminating the error. Please refer to chapter 3
for more information about HWCONFIG.
• Downloading the program
After the program is compiled successfully, the users can click the PLC menu, point to Transfer,
and click Download. The users can also click on the toolbar after the program is compiled
successfully. Select the Program checkbox and the Comments checkbox in the Transfer Setup
window so that the program in the CPU module can be uploaded later, and then click OK.
4-28