ISPSoft User Manual

ISPSoft User Manual
• Compile
Click Compile on the Compile menu, or
on the toolbar.
After the check is complete, the Compile Message page shows the result related to the check. If
there is any error in the project, the Compile Message page will show the related message. After
the message is clicked, the system will automatically lead users to the place where the error occurs.
The users can enable the Check function or the Compile function after the error is eliminated.
4.6 Testing and Debugging a Program
4.6.1 Creating a Connection
Before a program and parameters are downloaded to a PLC or monitored online, ISPSoft must be
connected to the PLC. In this example, ISPSoft is connected to the CPU module AHCPU530-EN
through a USB cable. Please refer to section 2.4 for more information about connecting ISPSoft to a
PLC in other ways. Please refer to operation manuals for more information about wiring.
Those who have connected ISPSoft to a PLC successfully in accordance with the contents of
section 2.4 can skip this section.
(1) Install the modules on the main backplane in accordance with the hardware configuration in
HWCONFIG. Make sure that the wiring is correct, and then power the CPU module.
(2) Connect the CPU module to the computer through a USB cable. If the USB driver for the
AH500 series CPU module has been installed on the computer, Delta PLC will appear in the
Device Manager Window, and a port number will be assigned to Delta PLC. Please refer to
appendix A for more information about installing a USB driver.
(3) Make sure that COMMGR is started, and the icon representing COMMGR is displayed on the
system tray. If the icon representing COMMGR is not displayed on the system tray, users can
start COMMGR by clicking the shortcut on the Start menu (Start>Programs>Delta Industrial
4-24