ISPSoft User Manual

Chapter 4 Quick Start
(2) Click on the toolbar, or press Esc on the keyboard. After the contact is double-clicked, a
drop-down list will appear. The items on the drop-down list are Normally Open, Normally
Close, Rising-edge Trigger, and Falling-edge Trigger. In this example, Rising-edge
Trigger is selected.
(3) Click the line at the right side of the contact, click on the toolbar, and move the mouse
cursor to the red frame. Likewise, the mouse cursor appears as a coil when the mouse cursor
is above or under the red frame. Users can decide where to insert the coil.
In this example, the users do not need to decide where to insert the coil. Therefore, the mouse
cursor can be near the red frame, and the users can click the left mouse button.
4-11