ISPSoft User Manual

ISPSoft User Manual
4.4.2 Setting the Parameters in a CPU Module and a Module
After AH16AP11R-5A is configured, users can set the parameters in the CPU module and the
parameters in the extension module. After the users double-click the CPU module or the extension
module, a corresponding window will appear.
After the CPU module is double-clicked, the PLC Parameter Setting window will appear. The users
can click the primary tabs at the top of the window, and the secondary tables at the bottom of the
window to set the parameters. In this example, the users only need to define the name of the CPU
module.
After the users click the CPU tab at the top of the window, and the Name tab at the bottom of the
window, they can type a name in the Name box. The users will find the default name in the Name
box is the same as the project name. Delete the default name, type “Main_Controller” in the Name
box, and click OK.
4-6