ISPSoft User Manual

ISPSoft User Manual
(2) The present values of the parameters are displayed in the PV column, but they are not
updated timely. After users click
in the window, the system will retrieve the present
values again, and the values retrieved will be displayed in the PV column.
(3) If users want to change the values in the data registers assigned to the parameters, they can
type the setting values in the SV column. Users can only type the setting values in the SV
cells for the parameters to which the data registers are assigned. If users want to change the
values of parameters, they can type the setting values in the SV cells for the parameters, and
click
after the typing of the setting values is complete. The values of the
parameters will be written into the data registers assigned to the parameters.
*. Before the value of a parameter is changed, users have to refer to the instructions for the module to make sure
of the range of values which are allowed.
3.5.6.4 Monitoring Table
If the hardware configuration is in the online mode, users can view the values in the data registers in
the Monitor Table window after they click Monitor Table on the Option menu. Users can not add
any item to the Monitor Table window. After users select the checkboxes in the Monitor cells for
parameters, the data registers assigned to the parameters will be listed in the Monitor Table
window. Please refer to section 3.4.2 for more information.
3-71