ISPSoft User Manual

ISPSoft User Manual
window will appear. The items which will be downloaded include the hardware configuration, the
parameters in the modules, and the parameters in the CPU module, but do not include the
parameters in the intelligent modules. After the users click OK, the parameters will be
downloaded to the CPU module.
• Uploading the system parameters
After users click Upload on the Option menu, or on the toolbar, the system parameters in
the CPU module will be uploaded to HWCONFIG. The items which will be uploaded include the
hardware configuration, the parameters in the modules, and the parameters in the CPU module,
but do not include the parameters in the intelligent modules.
3.5.5 I/O Scan
Users can configure modules in the way mentioned above. If users have gotten related hardware,
they can install the hardware, click I/O Scan in HWCONFIG, and scan the actual hardware
configuration through communication. The time of configuring the modules will be saved. Users
have to make sure that ISPSoft has connected to the CPU module normally before they carry out
the operation. Please refer to section 2.4 for more information about communication setting.
Users can click I/O Scan on the Option menu, or on the toolbar to carry out the operation. The
contents which will be scanned include the module models, the hardware configuration, and the
firmware versions of the modules, but do not include the parameters in the modules and the
parameters in the CPU module. After I/O Scan is clicked, the original hardware configuration and
the parameter setting will be cleared. However, the parameters in the CPU module will not be
affected.
3-65