ISPSoft User Manual

ISPSoft User Manual
After users select the Enable Email Sending Function checkbox, they can set the related
parameters.
SMTP Server: Users can set the IP address of an SMTP server.
Port: Users can set a port for an SMTP server, or select the Default (25) option button.
Local Email Address: Users can set the address of an actual sender. A local email address is
composed of 64 characters at most.
SMTP Subject: Data typed in the SMTP Subject box will be put at the front part of the subject of
every email. Only English letters, numerical digits, and special marks can be
typed in the box. The subject of an email is composed of 16 characters at most.
Account Identification: If users want to authenticate themselves with a user name and a
password before logging in to an SMTP server, they can select the Yes
option button.
Account Identification Info.: Users can type a user name and a password which are used for
authentication. A user name is composed of 16 characters at
most, and a password is also composed of 16 characters at most.
If the parameters above are set correctly, and the computer can
connect to an SMTP server normally, users can click
Identification to test whether the user name and the password
are correct.
*. The parameters set in HWCONFIG must be downloaded to the CPU module so that they can take effect. (Please
refer to section 3.3.6 or section 3.5.4 for more information.)
3.3.5.4 Ethernet─Advance: Email Trigger
After users click the Ethernet─Advance tab at the top of the window, and the Email Trigger tab at
the bottom of the window, they can set triggers for the sending of emails. Before setting triggers,
users have to click the Email tab, and select the Enable Email Sending Function checkbox.
3-45