Installation, Operation and Maintenance Manual - Data Aire

Condensers (Water-Cooled)
___ Check for leaks
___ Entering/leaving water temperatures ENT ____° LVG ____°
Compressor
___ Check for oil leaks
___ Check compressor mounting
___ Inspect wire connection
___ Record suction pressure
____ PSIG
___ Record discharge pressure ____ PSIG
___ Record superheat ____ °
___ Record sub-cooling ____ °
___ Check high pressure cut-out ____ PSIG
___ Check low pressure cut-in ____ PSIG
___ Check low pressure cut-out ____ PSIG
___ Record compressor amp draw L1 ____ L2 ____ L3 ____
Condensate Pan
___ Check for debris
___ Inspect/check fl oat operation
___ Check pump operation
Air Cooled Condenser (if applicable)
___ Inspect coil/clean if required
___ Inspect motor/motor mounts
___ Inspect fan blade(s)
___ Check wiring
___ Inspect piping for leaks
Dry Cooler (if applicable)
___ Inspect coil/clean if required
___ Inspect motor/motor mounts
___ Inspect fan blade(s)
___ Check wiring
___ Inspect piping for leaks
Glycol Pump (if applicable)
___ Glycol leaks
___ Pump operation
40