Installation, Operation and Maintenance Manual - Data Aire
Installation, Operation and Maintenance Manual - Data Aire
Installation, Operation and Maintenance Manual - Data Aire
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
the panel. Although these existing sensors can be removed for remote mounting, the remote sensor<br />
option provides a more convenient means of fi eld installation. When ordered, the remote sensors<br />
are shipped with a predetermined length of cable <strong>and</strong> come mounted in a plastic enclosure.<br />
The temperature <strong>and</strong> humidity sensors require a total of six wires. These wires should be twisted<br />
pair, shielded type (minimum of 18 gauge).<br />
3.8.2 Mini DAP-III Units<br />
The optional Mini DAP-III microprocessor control panel normally comes with the sensors mounted<br />
in the display module. Although these existing sensors can be removed for remote mounting, the<br />
remote sensor option provides a more convenient means of fi eld installation. When ordered, the<br />
remote sensors are shipped with a predetermined length of cable <strong>and</strong> come mounted in a plastic<br />
enclosure. The temperature <strong>and</strong> humidity sensors require a total of fi ve wires. These wires should<br />
be 18 gauge, twisted pair, shielded type.<br />
3.9 Condensate Pumps<br />
The optional condensate pump that’s shipped loose normally require a separate power source<br />
(110 volt). Always check the pump power requirements before connecting power. Condensate<br />
pumps are available in other voltages.<br />
Optional condensate pumps that are factory wired <strong>and</strong> mounted do not require any additional wiring<br />
or a separate power source. However, fi eld piping is still required.<br />
18
Change language