Tm-fiber LASER PUMPED ACOUSTO-OPTICALLY ... - IPG Photonics

AQS Ho:YAG SERIES
Tm-fiber LASER PUMPED ACOUSTO-OPTICALLY
Q-SWITCHED Ho:YAG LASER
Main Features:
• Operating Wavelength 2090 nm
• Output Energy up to 20 mJ
• Pulse Duration 10 - 100 ns*
• Repetition Rate 0.1 - 10 kHz
• TEM 00
Output Beam Quality
• Flat-top Beam Option
*Variable pulse duration at constant output energy is available in
MOPA configuration
Typical Applications:
• LIDAR
• Materials Processing
• Medical Applications
• OPO Pump Source
Additional Features:
• Compact Design
• Power Amplification Option
• Variable Pulse Duration

Model AQS Ho-YAG
Typical Product Specifications 7
Parameter
Symbol
AQS
Ho-YAG-5
AQS
Ho-YAG-12
AQS Ho-YAG-
MOPA-20
Unit
Mode of Operation -- Pulsed, Acousto-Optically Q-switched
--
Output Beam Mode -- TEM 00
--
Beam Diameter 1 2w 0 1.5
mm
Beam Quality M 2 1.05 1.1 1.2 --
Beam Divergence 0 0.2 0.3 0.5 mrad
Polarization State -- Linear
--
Pulse Duration 10-100
ns
Pulse Duration Variability at Constant
Output Energy 2 N/A N/A 15-60 ns
Repetition Rate 3 f 100-10000
Hz
Max. Pulse Energy 4
E
5@ 0.1 kHz
2@ 1 kHz
0.3@ 10 kHz
12@ 0.1 kHz
4@ 1 kHz
0.5@ 10 kHz
20@ 0.1 kHz
9@ 1 kHz
1@ 10 kHz
Peak Optical Power P peak >200 >500 >1000 kW
Central Wavelength out 2090
nm
Pump Laser 5 TLR-XX-1908 IPG Photonics TLR-XX-1908 Tm-fiber CW Laser --
Pump Laser Dimensions -- 3U 19” Rack
--
Ho-YAG Head Dimensions -- ~324
mm
mJ
Pump Laser Cooling Method
Ho-YAG Module Cooling Method
Air
Water
Supplied Voltage, AC -- 110/220
V
Power Consumption 6 -- 200
W
Operation Temperature -- 15-30
C
Operation Humidity 0-80
%
Storage Temperature -- -40 to +70
C
Storage Humidity 0-95
%
Warm Up Time
10-20
min
PC Interface -- USB2/RS232
--
1
Can be adjusted to meet customer specifications
2
Pulse duration variability at constant energy is available for MOPA
configuration with manual or computer control
3
Different repetition rates can be avail.; discuss your needs with IPG
4
Output energies >20 mJ are available at customer’s request
5
Pump laser model depends on the required output power of the laser system
6
Electrical power consumption depends on the max. output power
of the Ho:YAG system
7
Not all combinations of parameters are avail.; discuss your needs with IPG
Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained herein shall legally bind IPG
Photonics only if it is specifically incorporated into the terms and conditions of a sales agreement. Some specific combinations of options may not be available. The
user assumes all risks and liability whatsoever in connection with use of a product or its application. IPG, IPG Photonics and IPG Photonics logo are trademarks of IPG
Photonics Corporation. Other trademarks are property of their respective holders. © 2013 IPG Photonics Corporation. All rights reserved. Protected by US
patents 5,541,948; 6,960,486; 7,548,571 and applicable licenses.
IPG Photonics Mid-Infrared Lasers
+1 205.307.6677; Fax +1 205.307.6688
sales.us@ipgphotonics.com
www.ipgphotonics.com/midIR
DANGER
INVISIBLE LASER RADIATION -
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
MAXIMUM OUTPUT: 30 mJ, 10-200ns
WAVELENGTHS: 0.1-10 kHz, 2100 nm
CLASS IV LASER PRODUCT
01/13