ear-lp-sf series erbium fiber amplifiers ear-lp-sf ... - IPG Photonics
ear-lp-sf series erbium fiber amplifiers ear-lp-sf ... - IPG Photonics
ear-lp-sf series erbium fiber amplifiers ear-lp-sf ... - IPG Photonics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.0 Typical Performance<br />
Characteristic EAR5KLPSF EAR10KLPSF EAR20KLPSF EAR30KLPSF<br />
Mode of Operation 1<br />
CW<br />
Polarization of Output Signal<br />
Operating Wavelength Range, nm 2 1540-1600<br />
Lin<strong>ear</strong><br />
1540-1570 1550-1570<br />
Operating Bandwidth (FWHM), nm 25<br />
20<br />
Central Operating Wavelength<br />
Range, nm 3<br />
Input Power Range, mW 4<br />
1550<br />
1-5<br />
Minimum Input Signal Linewidth, kHz 5<br />
1 10<br />
Saturated Output Power (P IN =3 mW), W 5 10 20 30<br />
Output Power Tunability, % 10 - 100<br />
5-100<br />
Output Power Stability (over 8 hours,<br />
ACC), %<br />
2<br />
3<br />
Relative Residual Pump at Input/Output<br />
Ports, dB<br />
Maximum Power Consumption<br />
(at 20°C), W<br />
-60<br />
70 125 270 400<br />
2.0 General Characteristics<br />
Dimensions 6<br />
19" Rack 3U<br />
19" Rack 4U<br />
1 Pulsed operation is available on request.<br />
2 Central wavelength could be selected in this range although bandwidth would be as specified in<br />
specification.<br />
3 Typical central wavelength, other central wavelengths available on request.<br />
4 Higher and lower input powers are available on request.<br />
5 For CW Signal only; Pulsed operations should be discussed with <strong>IPG</strong> <strong>Photonics</strong>.<br />
6 OEM module packages are available on request.<br />
Options:<br />
• Output Isolator<br />
• Improved Extinction Ratio<br />
• Polarization Maintaining Operation<br />
• Integrated