LEEP System 1000Â® Workstation Operating ... - CooperSurgical

More documents

Recommendations

Info

$Silicone (Latex Free) English EC REP 0086 - CooperSurgical$

Figures 3 through 5 show the proper and improper ways of hooking up and using the various electrodes and pads on the patient. PROPER Electrosurgical Generator RF current through patient to return pad Active Electrode Patient Grounded Metal Case Two conductor patient electrode continuity monitor Patient return pad (Thigh) Patient may be grounded Figure 3 IMPROPER Electrosurgical Generator Burn occurs at small grounded contact RF EKG Isolated ESU Surgeon touches electrode to grounded object RF current flows from ground through EKG pad, through patient to return pad Figure 4 IMPROPER Electrosurgical Generator RF current flows from electrode Burn occurs at small grounded contact RF EKG Isolated or grounded ESU Patient return pad touches grounded table RF current returns to patient return pad via ground path Figure 5 6 LEEP System 1000 ® Workstation • Operating Manual
Section 3 LEEP System 1000 ® Electrosurgical Generator Features • Microprocessor-controlled for increased precision, accuracy, repeatability and safety • Adequate power for all LEEP monopolar electrosurgical procedures • Accurate selection of discrete power levels • Digital display of output power levels • Choice of radio-frequency waveforms including CUT, BLEND and COAG to accommodate subtle differences in technique and accessory performance • Patient Plate continuity monitoring with audible alarm • Distinct audible tones for CUT/BLEND modes and COAG mode with associated MODE light • Fully regulated isolated output power • Meets or exceeds IEC 601-2-2, second edition • Non-electric pneumatic Foot Pedal to maximize safety • Choice of reusable or disposable Patient Plate • Choice of reusable or disposable Handpiece • Choice of reusable or disposable electrodes • Output power safety audible alarm with automatic power shut-off • Class 1, type BF, protected for use with defibrillator • Membrane switching to maximize cleanliness and ease of use LEEP System 1000 ® Workstation • Operating Manual 7
Page 1: LEEP System 1000 ® Workstation Mod
Page 4 and 5: Table of Contents (continued) Secti
Page 6 and 7: Section 2 Locate all three product
Page 8 and 9: 2.4 Installing the Filters and Tubi
Page 12 and 13: Section 4 Front Panel of the LEEP S
Page 14 and 15: 5.2 Indications The LEEP procedure
Page 16 and 17: Section 6 Operating the System NOTE
Page 18 and 19: REMEMBER, THIS IS NOT AN ATTEMPT TO
Page 20 and 21: • The electrical cord of the Elec
Page 22 and 23: Section 11 Cleaning the LEEP System
Page 24 and 25: Section 15 Service and Repair LEEP
Page 26 and 27: Immunity Test IEC 60601 Test Level
Page 28 and 29: 17.2 General Specifications - LEEP
Page 30 and 31: 17.3 Smoke Evacuator INPUT VOLTAGE
Page 32: NOTES 28 LEEP System 1000 ® Workst

LEEP System 1000Â® Workstation Operating ... - CooperSurgical

Create successful ePaper yourself

Delete template?

Save as template?