Basic information on the surgical procedures - Straumann

More documents

Recommendations

Info

1.3.3 Straumann ® Bone Level CrossFit ® Connection The CrossFit ® Connection of Straumann ® Bone Level implants applies the know-how and benefits from the Straumann ® synOcta Morse taper connection to the connection requirements at bone level. Similar to the Straumann ® synOcta connection, the mechanically locking friction fit of the 15° conicalcylindrical CrossFit ® Connection with four internal grooves has excellent longterm stability under all loading conditions and virtually eliminates screw loosening. The CrossFit ® Connection is available for Straumann ® Bone Level implants only. NC RC Straumann ® Bone Level Ø 4.1 mm and Ø 4.8 mm implants have the same connection, the regular CrossFit ® Connection (RC), and share the same secondary components. Straumann ® Bone Level Ø 3.3 mm implants feature the narrow CrossFit ® Connection (NC). The corresponding secondary components are colorcoded: p yellow = NC connection p magenta = RC connection Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm 8 1. The Straumann ® Dental Implant System 1.3 Implant-abutment connections
1.4 Surfaces Straumann ® implants are manufactured from biocompatible pure Grade 4 titanium. All dental implants are provided with the SLActive ® or the SLA ® surfaces. 1.4.1 Straumann ® SLActive The SLActive ® surface features the scientifically proven SLA ® surface topography. Additionally, it exhibits fundamentally improved surface properties such as hydrophilicity and chemical activity which significantly accelerate the entire osseointegration process. Hydrophilicity The hydrophilic properties of SLActive ® enable a larger accessible surface area for increased blood contact and bone cell attachment. Straumann ® SLActive – surface innovation p Proven SLA ® surface topography p Hydrophilicity for a larger accessible surface area p Chemical activity promoting faster osseointegration Chemical activity The chemical activity of SLActive ® provides ideal conditions for direct protein adsorption, stimulating immediate new bone formation. 1.4.2 Straumann ® SLA The SLA ® surface is produced using a large-grit sandblasting technique that generates a macro-roughness on the titanium surface. This is followed by acid-etching that superposes a micro-roughness. The resulting topography offers the ideal structure for cell attachment and is also the basis for the further developed SLActive ® surface. 1. The Straumann ® Dental Implant System 1.4 Surfaces 9
Page 1 and 2: BASIC INFORMATION ON THE SURGICAL P
Page 3 and 4: CONTENTS About this guide 2 1. The
Page 5 and 6: 1. THE STRAUMANN ® DENTAL IMPLANT
Page 7 and 8: s Implant Straumann ® Tapered Effe
Page 9: 1.3 Implant-abutment connections 1.
Page 13 and 14: 2. INDICATIONS AND CONTRAINDICATION
Page 15 and 16: Specific indications for Straumann
Page 17 and 18: Specific indications for Straumann
Page 19 and 20: 3. PREOPERATIVE PLANNING 3.1 Implan
Page 21 and 22: 3.1.1.1 Examples for single tooth g
Page 23 and 24: 3.1.1.2 Examples of multiple tooth
Page 25 and 26: 3.1.3 Coronoapical implant position
Page 27 and 28: 3.2 Planning aids 3.2.1 Mesiodistal
Page 29 and 30: Distance Indicator for Straumann ®
Page 31 and 32: To calculate the effective bone ava
Page 33 and 34: 4. SURGICAL PROCEDURES 4.1 Implant
Page 35 and 36: 4.1.1. Basic impla
Page 37 and 38: 6 500 rpm max. For Ø 4.1 mm and Ø
Page 39 and 40: 4.1.2. Fine implant bed preparation
Page 41 and 42: Two types of Straumann ® taps are
Page 43 and 44: Note TE implants generally do not n
Page 45 and 46: Required step * Required in dense b
Page 47 and 48: Straumann ® SLA 1 Step 1 - Open th
Page 49 and 50: 2 2 Step 2 - Remove the implant fro
Page 51 and 52: 5 Step 5 - Not needed for S/SP/TE S
Page 53 and 54: 7 7 Step 7 - Remove the instruments
Page 55 and 56: 4.4.1 Submucosal healing For submuc
Page 57 and 58: 4 Step 4 - Insertion and wound clos
Page 59 and 60: Overview of Bone Level abutments an
Page 61 and 62:
Hybrid solutions Platform NC Type M
Page 63 and 64:
6. ADDITIONAL INFORMATION ON INSTRU
Page 65 and 66:
Straumann ® Drill Stop reference c
Page 67 and 68:
Guidelines for the sterilization of
Page 69 and 70:
6.1.6 Holding key The holding key i
Page 71 and 72:
6.2.3 Depth stops for osteotomes Al
Page 73 and 74:
7. APPENDIX 7.1 Labeling and color
Page 75 and 76:
7.2 Related documentation Note Our
Page 77 and 78:
IMPORTANT GUIDELINES 7.3 Important
Page 79 and 80:
materials 10 Morse taper connection
show all

Basic information on the surgical procedures - Straumann

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?