Chip Blaster manual - Salvex

ChipBLASTER, Inc. 93
24.0. WARRANTY (Cont.):
24.3. WARRANTY (LIMITED) – RETROFITS
ChipBLASTER, Inc. Limited Warranty - High Pressure Retrofits
Limited Warranty. ChipBLASTER, Inc. warrants its ChipBLASTER high-pressure retrofits to be free
from defects in materials and workmanship for the lesser of one year or 4160 operating hours from the
date of delivery to the original user, subject to the conditions set forth below. During this warranty
period, ChipBLASTER will repair or replace, at its sole option, defective products or parts without
charge to the purchaser. ChipBLASTER, Inc. further warrants that its ChipBLASTER high-pressure
retrofit systems will not adversely affect or damage the cutting equipment on which ChipBLASTER
installs such systems.
Limited Warranty Conditions:
24.3.1. Warranty applies only to new ChipBLASTER retrofits.
24.3.2. This limited warranty does not apply to any damage, failure, defect or loss
caused by any or all the following circumstances or conditions: failure to follow
instructions or observe cautions and warnings relating to installation, operation,
applications, inspection and regular 3 maintenance, as specified in any
ChipBLASTER manual, quotation, acknowledgment, sales literature, spec sheet
or installation instructions (all of which shall hereinafter be referred to as
“applicable literature”); use of ChipBLASTER retrofits outside the parameters of
“normal usage” including, but not limited to misapplication, misuse, failure to
follow directions and instructions provided by ChipBLASTER applicable
literature; any damage or loss to products or parts which results from the
alteration, repair, modification, faulty installation, or service (other than regular
maintenance) by any one other than an authorized ChipBLASTER service
technician and the use of any add-ons, parts, accessories or components not
obtained from ChipBLASTER or an authorized ChipBLASTER supplier or
approved in writing by ChipBLASTER; damage to products or parts caused by
accident, abuse or misuse; normal wear and tear; damage which occurs in
shipment or as a result of an act of God, such as lightening, or electrical failures
such as line surges or brownouts.
24.3.3. Any replacement equipment or parts provided to the purchaser in fulfilling this
warranty are warranted for the un-expired portion of the original warranty.
24.3.4. If any ChipBLASTER products are found upon ChipBLASTER’s examination in
response to a warranty claim to have defects in material or workmanship,
ChipBLASTER will either replace or repair the product, at its sole option.
24.3.5. Warranty repairs will be completed at the purchaser’s location.
24.3.6. Other than the obligations imposed upon ChipBLASTER under this limited
warranty, ChipBLASTER shall not be liable for any other costs, expenses or
losses that the purchaser incurs to remedy any defect.
24.3.7. Repairs of defects in material or workmanship during the limited warranty period
shall be performed only by ChipBLASTER approved service technicians; the cost
of repairs performed by others will not be reimbursed by ChipBLASTER unless
prior approval is received in writing from ChipBLASTER.
3 Regular maintenance includes the minor normal maintenance required to be performed by buyer, at buyer’s expense as set
forth in the maintenance schedule included with this warranty as Exhibit A and posted on the outside panel of the
ChipBLASTER. Use of filters other than ChipBLASTER will void warranty coverage for any filtration related
damage or failures.
24.3