Chip Blaster manual - Salvex
Chip Blaster manual - Salvex
Chip Blaster manual - Salvex
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Chip</strong>BLASTER, Inc. 58<br />
16.0. PRESSURE ADJUSTMENT PROCEDURE ALTIVAR 31<br />
DRIVES: (Cont.)<br />
If you cannot achieve the desired output pressure, please check to be sure that the unloader has been<br />
properly set. Also refer to the orifice reference charts (SECTION 28) included to verify nozzle size to<br />
make sure you are within the machine’s capabilities.<br />
MODEL ORIFICE SIZE FLOW PRESSURE<br />
EV13, EVHP 0.110” (2.9 mm) 13.8 GPM 52.2/m 1000 PSIG (68.9 bar)<br />
16.0