Chip Blaster manual - Salvex

ChipBLASTER, Inc. 47
15.0. TROUBLESHOOTING (Cont.):
15.5. ALTIVAR 31 DRIVE (1 AFD) ERROR CODES (Cont.):
FAULTS WHICH CANNOT BE AUTOMATICALLY RESET
15.5.1. Faults which can be automatically reset:
15.5.1.1. After the cause of the fault has been removed, the faults in the table
listed on the next page can be reset.
15.5.1.2. With the automatic restart function. Refer to the “Atr” parameter in the
FLT menu on page 75 of the programming manual.
15.5.1.3. Via a logic input. Refer to the “rSF” parameter in the FLt menu on
page 75 of the programming manual.
15.5.1.4. By cycling power to the drive controller.
15.5