Chip Blaster manual - Salvex
Chip Blaster manual - Salvex
Chip Blaster manual - Salvex
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Chip</strong>BLASTER, Inc. 29<br />
14.0. PREVENTATIVE MAINTENANCE (Cont.):<br />
14.2. CHECKING HIGH PRESSURE PUMP OIL:<br />
14.2.1.The high pressure pump oil may be checked by observing the level in oil sight<br />
glass located on exterior of the <strong>Chip</strong>BLASTER.<br />
EV13, EVHP<br />
Typical sight glass mounting<br />
OIL SIGHT<br />
GLASS<br />
14.2.2. The oil level must be maintained between the full and add mark. If required add<br />
oil (refer to Section 14.3.2.5.)<br />
!<br />
FAILURE TO USE<br />
MOBIL 1 FULLY-SYNTHETIC 15W-50 WILL<br />
VOID YOUR WARRANTY<br />
!<br />
DO NOT ATTEMPT ANY SERVICE ON <strong>Chip</strong>BLASTER UNIT<br />
WITH POWER ENERGIZED. REMOVE ALL ENERGY<br />
SOURCES AND LOCK OUT / TAG OUT.<br />
14.2
Change language