All markets - Selecon
All markets - Selecon
All markets - Selecon
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation & User’s Manual<br />
PL1 LED Luminaires<br />
INSTALLATION AND SET UP<br />
1. Power Requirements<br />
The PL1 LED Luminaire operates on 120 to 240 volts AC (+/- 10%, auto-ranging). The luminaire contains an autoranging<br />
power supply. Depending on supply voltage, each luminaire can draw up to 1.91 amps.<br />
2. Connecting Power<br />
Table 1: PL1 LED Luminaire Voltage vs. Current<br />
Voltage (AC) Total Current (A)<br />
90 1.91<br />
100 1.72<br />
110 1.56<br />
120 1.43<br />
130 1.32<br />
140 1.23<br />
150 1.15<br />
160 1.07<br />
170 1.01<br />
180 0.96<br />
190 0.91<br />
200 0.86<br />
210 0.82<br />
220 0.78<br />
230 0.75<br />
240 0.72<br />
If the unit is supplied with an AC input cable, Table 2 describes how to connect power to your PL1 LED Luminaire .<br />
Field wiring of the PL1 LED Luminaire is straight forward. A total of 3 wires/conductors need to be brought to the<br />
unit. The following wiring scheme is required:<br />
Table 2: PL1 LED Luminaire AC Input Connections<br />
Wire Color<br />
Brown<br />
Blue<br />
Green/Yellow<br />
3. Connecting to the DMX512 Network<br />
Purpose<br />
Main / Line (120 to 240VAC)<br />
Neutral<br />
Ground<br />
Basic DMX512 installation consists of connecting multiple PL1 LED Luminaires together (up to 30 luminaires) in<br />
"daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector on<br />
the first PL1 LED Luminaire. Another cable runs from the other DMX connector on the first unit to a DMX<br />
connector on the next PL1 LED Luminaire (or DMX512 device to be controlled).<br />
6 INSTALLATION AND SET UP