we keep things moving - STÃBER ANTRIEBSTECHNIK GmbH + Co ...

More documents

Recommendations

Info

Appendix B PKW0 telegram Operation manual 13 The inverter deletes all response bytes together with the response ID 0. With response ID 2, the parameter number and the subindex are echoed from the job in the response. The inverter continues sending the complete response until the master formulates a new job. With read accesses to indicator values, the inverter always cyclically sends new current values until the master formulates a new job. When the device responds with 7:Job cannot be executed, the least significant byte of the parameter value (PWE) (thus in byte 7) contains the applicable error number. Error numbers in PKW0 parameter responses Error number Meaning Use for Additional info 00 hex Illegal parameter number Access to a non-existent parameter. 01 hex Parameter value cannot be changed 02 hex Upper or lo<strong>we</strong>r value limit has been exceeded Modification access to a parameter value that cannot be changed. Modification access with value outside the value limits. 03 hex Wrong subindex Access to a non-existent subindex. 04 hex No array Access with subindex to a non-indexed parameter. 05 hex Wrong data type Modification access with value which does not match the data type of the parameter. 11 hex Job cannot be executed due to operating state Access is not possible for temporary reasons which are not specified further. 65 hex Wrong job ID — — 66 hex Internal communication Example: no configuration — failed loaded 67 hex Reserved — — 77 hex Access not permitted by — — user level 79 hex Scaling error — — 7C hex Value in definition gap — — (see selection) 7D hex <strong>Co</strong>llision with other values — — 83 hex Error in pre-read function — — 0 Subindex Subindex Subindex 0 0 0 WE KEEP THINGS MOVING ID 441687.03 52
Appendix B PKW0 telegram Operation manual 13 Error number 84 hex Error in post-write function Rest Meaning Use for Additional info Reserved WE KEEP THINGS MOVING ID 441687.03 53
Page 1 and 2: PROFIBUS Operation manual Fundament
Page 3 and 4: Table of contents Operation manual
Page 5 and 6: Introduction Operation manual 1 You
Page 7 and 8: Notes on Safety Operation manual 2
Page 9 and 10: Notes on Safety Operation manual 2
Page 11 and 12: Mounting Operation manual 3 2 Remov
Page 13 and 14: Mounting Operation manual 3 3.2 Ins
Page 15 and 16: Mounting Operation manual 3 7 Secur
Page 17 and 18: Electrical installation Operation m
Page 19 and 20: Fundamentals of PROFIBUS Operation
Page 21 and 22: Fundamentals of PROFIBUS Operation
Page 23 and 24: Bus diagnosis/LEDs Operation manual
Page 25 and 26: Configuration of the bus system Ope
Page 27 and 28: Configuration of the bus system Ope
Page 29 and 30: Prozess data transmission PZD Opera
Page 31 and 32: Control with control and status bit
Page 33 and 34: Parameter Overview Operation manual
Page 41 and 42: Appendix A Operation manual 12 12 A
Page 43 and 44: Appendix A Operation manual 12 •
Page 45 and 46: Appendix A Operation manual 12 Erro
Page 47 and 48: Appendix A Operation manual 12 12.3
Page 49 and 50: Appendix A Operation manual 12 DPV1
Page 51: SPM Appendix B PKW0 telegram Operat
Page 55 and 56: Global Presence Address registers A

we keep things moving - STÃBER ANTRIEBSTECHNIK GmbH + Co ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

we keep things moving - STÃBER ANTRIEBSTECHNIK GmbH + Co ...