API-RP-576
API ICP Self Study Notes API ICP Self Study Notes
car seal Fion Zhang/ Charlie Chong
3.2 Dimensional Characteristics of Pressure-relief Valves 3.2.1 effective discharge area A nominal or computed area used with an effective Dimensional Characteristics of Pressure-relief Valves discharge coefficient to calculate the minimum required relieving capacity for a pressure-relief valve per the preliminary sizing equations contained in API 520. Refer to API 520-1 for the preliminary sizing equations. API 526 provides effective discharge areas for a range of sizes in terms of letter designations, “D” through “T.” 3.2.2 huddling chamber An annular pressure chamber located downstream of the seat of a pressurerelief valve, for the purpose of assisting the valve to achieve lift. Fion Zhang/ Charlie Chong
- Page 1 and 2: API-RP-576 Inspection of Pressure-r
- Page 3 and 4: Fion Zhang/ Charlie Chong Speaker:
- Page 5 and 6: 5 Causes of Improper Performance 5.
- Page 7 and 8: 1 Scope Fion Zhang/ Charlie Chong
- Page 9 and 10: The recommendations in this publica
- Page 11 and 12: This publication does not cover tra
- Page 13 and 14: pressure-relief valves Fion Zhang/
- Page 15 and 16: pilot-operated pressure-relief valv
- Page 17 and 18: upture disks Fion Zhang/ Charlie Ch
- Page 19 and 20: 2 Normative References Fion Zhang/
- Page 21 and 22: • ASME PTC 25, Pressure Relief De
- Page 23 and 24: 3.1 General For the purposes of thi
- Page 25: galling Fion Zhang/ Charlie Chong
- Page 29 and 30: inlet size outlet size Fion Zhang/
- Page 31 and 32: Fion Zhang/ Charlie Chong huddling
- Page 33 and 34: Fion Zhang/ Charlie Chong lift
- Page 35 and 36: Basic Function of a Spring Loaded S
- Page 37 and 38: Valve Closed. In a direct spring lo
- Page 39 and 40: The pressure below the valve must i
- Page 41 and 42: Fion Zhang/ Charlie Chong F p = p*A
- Page 43 and 44: Functional Diagram. The following d
- Page 45 and 46: 3.3 Operational Characteristics—S
- Page 47 and 48: 3.3.3 maximum allowable working pre
- Page 49 and 50: 3.3.4 maximum operating pressure Th
- Page 51 and 52: Fion Zhang/ Charlie Chong Keywords:
- Page 53 and 54: 3.4.5 burst-pressure tolerance The
- Page 55 and 56: 3.4.10 marked burst pressure or rat
- Page 57 and 58: 4 Pressure-relieving Devices Fion Z
- Page 59 and 60: 4.2 Pressure-relief Valve Fion Zhna
- Page 61 and 62: 4.3 Safety Valve. Fion Zhnag/ Charl
- Page 63 and 64: 4.3.1 General. A safety valve is a
- Page 65 and 66: 4.3.2 Applications A safety valve i
- Page 67 and 68: Fion Zhnag/ Charlie Chong
- Page 69 and 70: 4.4.1 General. A relief valve is a
- Page 71 and 72: 4.5 Safety-relief Valve. Fion Zhnag
- Page 73 and 74: 4.6 Conventional Safety-relief Valv
- Page 75 and 76: 4.6 Conventional Safety-relief Valv
3.2 Dimensional Characteristics of Pressure-relief Valves<br />
3.2.1 effective discharge area<br />
A nominal or computed area used with an effective Dimensional<br />
Characteristics of Pressure-relief Valves discharge coefficient to calculate<br />
the minimum required relieving capacity for a pressure-relief valve per the<br />
preliminary sizing equations contained in <strong>API</strong> 520. Refer to <strong>API</strong> 520-1 for<br />
the preliminary sizing equations. <strong>API</strong> 526 provides effective discharge<br />
areas for a range of sizes in terms of letter designations, “D” through “T.”<br />
3.2.2 huddling chamber<br />
An annular pressure chamber located downstream of the seat of a pressurerelief<br />
valve, for the purpose of assisting the valve to achieve lift.<br />
Fion Zhang/ Charlie Chong