New Sizes From Xpert - Step four
New Sizes From Xpert - Step four
New Sizes From Xpert - Step four
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Shop<br />
Milling cutter offer<br />
VHM Milling Cutter 2330<br />
Milling cutter offer<br />
VHM Milling Cutter 2100<br />
HM milling cutter with three<br />
knives, fishtail tip, right<br />
twist, good service life, clean<br />
cutting performance, versatile<br />
applicability, easy immersion,<br />
even into hard materials.<br />
VHM milling cutter, Type<br />
2330, 1/8“ shaft; 10 piece<br />
set with 3mm diameter<br />
Perfectly suitable for the processing of short-chipping<br />
(harder) aluminium, non-ferrous metals, harder plastics,<br />
derived timber products and composites. Unsuitable for<br />
soft thermoplastics, e.g. ABS, PE, PS.<br />
VHM milling cutter, Type<br />
2100, 1/8“ shaft; 10 piece<br />
set with 2 pieces each 0.8<br />
mm, 1.0 mm, 1.2 mm, 1.6<br />
mm and 2 mm<br />
2 flute routers, micro-spiralled<br />
toothing with chip<br />
breakers, fishtail tip, right<br />
cutting, right helix, fulfil the<br />
highest quality demands<br />
with regard to chip transport, clean cut edges. Particularly<br />
suitable for contour milling of circuit boards and fibrous<br />
composite materials, such as glass fibre reinforced plastic<br />
(GRP) and carbon fibre reinforced plastic (CRP).Also suitable<br />
for Depron with very high feed rates. Unsuitable for soft<br />
thermoplastics, such as ABS, PE, PS, as well as wood and<br />
metal.<br />
VHM Milling Cutter, Type 2330:<br />
VHM Milling Cutter, Type 2100:<br />
price reduction from € 91.70 to € 45.00 price reduction from € 55.00 to € 28.00<br />
Spring Awakening<br />
15 % spring discount<br />
If you mention the codeword “Spring Awakening” when placing<br />
an order, you will receive a 15% discount up until the 30 th<br />
of April, 2011, for the following accessories.<br />
Engraving unit for 43mm<br />
milling motors:<br />
price reduction from € 372.00 to € 316.20<br />
Suction clamp collar for<br />
43mm milling motors:<br />
price reduction from € 138.00 to € 117.30<br />
Plotting knife complete set:<br />
price reduction from € 264.00 to € 224.40<br />
Special Offer<br />
Milling under Windows with<br />
<strong>Xpert</strong>LINK and <strong>Xpert</strong>MILL V2<br />
The changeover to the<br />
<strong>Xpert</strong>LINK / <strong>Xpert</strong>MILL system<br />
under windows was<br />
never so easy or such a bargain.<br />
Enjoy the numerous advantages<br />
provided by milling<br />
under windows, and keep<br />
your fingertips on the pulse<br />
of time.<br />
Here is an upgrade example:<br />
Do you operate your milling machine with the aid of SF-<br />
C2 electronics and the V4 Pro milling software without expansion<br />
modules?<br />
With <strong>Xpert</strong>LINK and the V4 Pro upgrade to <strong>Xpert</strong>MILL V2,<br />
available under Windows for the special offer price of only<br />
€ 355.00 including VAT, you will become capable of real<br />
time and multitasking operation.<br />
Make the most of this opportunity and send us a request<br />
for your individual offer!<br />
Including VAT. Offer applies until the 30th of April, 2011.<br />
STEP-FOUR | March 2011<br />
7
Change language