Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chipboard<br />
Standard Grade Type P2<br />
Minimum 600 density interior use only.<br />
• sizes marked ‘CE’ are CE/CPD compliant<br />
as ‘fit for purpose’<br />
Code Size<br />
8412C 2440 x 1220 x 12mm ‘CE’<br />
8418C 2440 x 1220 x 18mm ‘CE’<br />
8425C 2440 x 1220 x 25mm ‘CE’<br />
8430C 2440 x 1220 x 30mm<br />
10418C 3050 x 1220 x 18mm<br />
10425C 3050 x 1220 x 25mm<br />
Flooring Grade T&G Type P4<br />
Tongued & Grooved all four edges. Minimum<br />
700 density interior use only. Maximum joist<br />
spacing 450mm.<br />
• CE/CPD compliant as ‘fit for purpose’<br />
Code Size<br />
8218TGC 2400 x 600 x 18mm<br />
Flooring Grade T&G Type P5<br />
Moisture Resistant (V313)<br />
Moisture resistant, for use in areas of high<br />
humidity and high moisture risk.<br />
• ideal for kitchens, bathrooms and extensions<br />
• increasingly being specified instead of standard<br />
P4 Flooring Grade Chipboard<br />
• CE/CPD compliant as ‘fit for purpose’<br />
Code Size<br />
8218MRTGC 2400 x 600 x 18mm<br />
8222MRTGC 2400 x 600 x 22mm<br />
Oriented Strand<br />
Board (OSB)<br />
A general purpose board suitable for exterior<br />
use composed of timber wafers/strands of<br />
variable species, and bonded under pressure<br />
with waterproof resin. Made up in 3 layers,<br />
cross oriented to give maximum strength.<br />
• CE/CPD compliant as ‘fit for purpose’<br />
Conditioned Grade OSB3<br />
• approved by the British Board of Agrement<br />
(BBA)<br />
• specified for flat roofs, flooring and wall<br />
sheathing<br />
• felt manufacturer’s guarantee dependant on<br />
board being BBA<br />
• cheaper alternative to Softwood Ply<br />
• CE/CPD compliant as ‘fit for purpose’<br />
Code Size<br />
84110SB 2440 x 1220 x 11mm<br />
84150SB 2440 x 1220 x 15mm<br />
84180SB 2440 x 1220 x 18mm<br />
OSB3 (BBA Approved)<br />
Blockboard<br />
Far Eastern/Brazilian 5 Ply<br />
5 Ply long grain, interior use, face veneers are<br />
always hardwood.<br />
• face veneers can be stained, painted or<br />
varnished<br />
Code Size<br />
8418RB 2440 x 1220 x 18mm<br />
Door Blanks<br />
General construction is of a thick solid timber<br />
core with a face veneer flush either side.<br />
Veneer is generally suitable for painting. Door<br />
blanks for internal use only are generally<br />
chipboard core.<br />
• ‘Lite’ door blanks are about 20% lighter than<br />
standard<br />
• ‘Tri-Core’ blanks are not only lighter, but also<br />
particularly stable<br />
• Decorative Veneer versions also available<br />
• Blanks can be trimmed to size and glazing<br />
apertures added (glazing aperture will have<br />
size limitations if used as a fire door)<br />
• Used where an oversized door is required, or<br />
to fit a non-standard opening<br />
Where used as a fire resistant door, generally<br />
• 45mm thick blanks achieve 30 minute fire<br />
rating<br />
• 54mm thick blanks achieve 60 minute fire<br />
rating<br />
To meet fire rating, whether used full size or<br />
trimmed to fit, blanks are required to be lipped<br />
both long edges and on 60 minute, short edges<br />
as well. Intumescent Strip/Smoke Seal is also<br />
required, either fitted underneath or on the<br />
lipping, or to the door frame itself.<br />
‘Lite’ Internal/External (30min)<br />
Code<br />
26FUNSL<br />
29FUNSL<br />
30FUNSL<br />
40FUXL<br />
Size<br />
1981 x 762 x 45mm<br />
2058 x 838 x 45mm<br />
2135 x 915 x 45mm<br />
2440 x 1220 x 45mm ‘Superlite’<br />
Sentry or similar<br />
Internal/External (30min)<br />
Code<br />
26FUX<br />
29FUX<br />
30FUX<br />
Size<br />
1981 x 762 x 45mm<br />
2058 x 838 x 45mm<br />
2135 x 915 x 45mm<br />
Veneered Internal (30min)<br />
Code Size<br />
30FUNS 2135 x 915 x 45mm Sapele<br />
30FUNA 2135 x 915 x 45mm Ash<br />
30FUNOQ 2135 x 915 x 45mm Quarter<br />
Cut Oak<br />
Internal/External (60mm)<br />
Code<br />
30FUXD<br />
Size<br />
2135 x 915 x 54mm<br />
15
Plywood<br />
Far Eastern Brazilian WBP BB/CC<br />
and or B/BB<br />
Long grain, hardwood veneers throughout.<br />
• for interior or exterior use<br />
• WBP gluing highly resistant to weather,<br />
micro-organisms and wet and dry heat<br />
• hard wearing and very durable<br />
Code Size<br />
844WBPP 2440 x 1220 x 3.6mm<br />
846WBPP 2440 x 1220 x 5.5mm<br />
849WBPP 2440 x 1220 x 9mm<br />
8412WBPP 2440 x 1220 x 12mm<br />
8415WBPP 2440 x 1220 x 15mm<br />
8418WBPP 2440 x 1220 x 18mm<br />
8425WBPP 2440 x 1220 x 25mm<br />
Far Eastern/Brazilian WBP BB/CC<br />
Description as above<br />
Code Size<br />
1054WBPP 3050 x 1525 x 3.6/4mm<br />
1056WBPP 3050 x 1525 x 5.5/6mm<br />
1059WBPP 3050 x 1525 x 9mm<br />
10512WBPP 3050 x 1525 x 12mm<br />
10518WBPP 3050 x 1525 x 18mm<br />
10525WBPP 3050 x 1525 x 25mm<br />
Birch WBP<br />
Although WBP gluing, Birch ply is made up of<br />
veneers which are officially classified as<br />
perishable. Not recommended for any exposed<br />
exterior application unless pressure<br />
preservative impregnated.<br />
Russian/Latvian<br />
Code Size<br />
55BP 1525 x 1525 x 1.5mm<br />
844BP 1220 x 2440 x 4mm<br />
846BP 1220 x 2440 x 6mm<br />
849BP 1220 x 2440 x 9mm<br />
8412BP 1220 x 2440 x 12mm<br />
8418BP 1220 x 2440 x 18mm<br />
8424BP 1220 x 2440 x 24mm<br />
Finnish<br />
1054BP 1525 x 3050 x 4mm<br />
1056BP 1525 x 3050 x 6mm<br />
10512BP 1525 x 3050 x 12mm<br />
10518BP 1525 x 3050 x 18mm<br />
Flexible Plywood -<br />
Moisture Resistant Gluing<br />
• flexibility allows quick and easy creation of<br />
intricate curves and circular shapes<br />
• used in furniture making, exhibition work,<br />
shopfitting, columns and framework etc<br />
Code Size<br />
845FPL 2440 x 1220 x 5mm - Long Grain<br />
845FPC 1220 x 2440 x 5mm - Cross Grain<br />
848FPL 2440 x 1220 x 8mm - Long Grain<br />
848FPC 1220 x 2440 x 8mm - Cross Grain<br />
For Veneered Flexible Plywood, see under<br />
‘Decorative <strong><strong>Sh</strong>eet</strong> Material’<br />
Notes on Glue/Bond Types<br />
WBP:This Glue/Bond type is highly resistant to<br />
weather, micro-organisms, cold and boiling water and<br />
wet and dry heat.The lifespan of these boards are also<br />
subject to the durability of specie of veneer used, for<br />
example, Hardwood Far Eastern Ply will be more<br />
durable than Birch Veneered Ply.<br />
Exterior:This Glue/Bond type conforms to American<br />
and Canadian gradings, glues are classed as being 100%<br />
waterproof.Again, the durability of veneer must be<br />
taken into consideration,American and Canadian<br />
Plywoods are coniferous (softwood) species.<br />
BBA Approved Construction (CE2+)<br />
Ply-WBP Glue<br />
Metsa Pine or similar softwood ply construction<br />
• British Board of Agrement (BBA) approved<br />
for load bearing applications<br />
• conforms to BS5268 Part 2, for use in<br />
roofing, flooring and wall sheathing<br />
• CE/CPD compliant as ‘fit for purpose’<br />
Code Size<br />
849BBA 2440 x 1220 x 9mm<br />
8412BBA 2440 x 1220 x 12mm<br />
8418BBA 2440 x 1220 x 18mm<br />
8424BBA 2440 x 1220 x 24mm<br />
<strong>Sh</strong>uttering Ply-WBP Glue<br />
Elliottis Pine or similar softwood ply<br />
construction<br />
• general purpose use<br />
• not suitable for permanent outdoor<br />
applications<br />
Code Size<br />
8418SP 2440 x 1220 x 18mm<br />
Tongued and Grooved Plywood<br />
for Flooring<br />
Finnish Spruce, tongued and grooved all 4 edges<br />
• internal use,WBP gluing<br />
• graded 111/111 both faces<br />
• BBA Approved for load bearing<br />
• CE/CPD compliant as ‘fit for purpose’<br />
Code Size<br />
8218TG4P 2440 x 610 x 18mm<br />
Marine Plywood<br />
WBP glueing, long grain, selected durable<br />
hardwood veneers throughout.<br />
• suitable for marine, external and internal<br />
uses<br />
• conforms to BS1088<br />
Code Size<br />
844MP 2440 x 1220 x 4mm<br />
846MP 2440 x 1220 x 6mm<br />
849MP 2440 x 1220 x 9mm<br />
8412MP 2440 x 1220 x 12mm<br />
8418MP 2440 x 1220 x 18mm<br />
8425MP 2440 x 1220 x 25mm<br />
16
MDF - Medium Density Fibreboard<br />
Manufactured from wood fibres, dry-bonded with synthetic resins then<br />
compressed at high frequency.<br />
• uniform, strong, compact and stable<br />
• smooth both faces and uniform in thickness<br />
• can be cut and profiled, lipping not normally required<br />
• can be screwed, glued or dowelled etc<br />
• no grain or splintering problems<br />
• used heavily in the furniture industry<br />
• ideal for making bespoke furniture, doors and units<br />
It is recommended that a suitable face mask is worn when cutting<br />
or machining, and all faces and edges are sealed with MDF sealer.<br />
Standard<br />
(For interior use only)<br />
Code<br />
Size<br />
842MDF 2440 x 1220 x 2.5mm<br />
843MDF 2440 x 1220 x 3mm<br />
844MDF 2440 x 1220 x 4mm<br />
846MDF 2440 x 1220 x 6mm<br />
849MDF 2440 x 1220 x 9mm<br />
8412MDF 2440 x 1220 x 12mm<br />
8415MDF 2440 x 1220 x 15mm<br />
8418MDF 2440 x 1220 x 18mm<br />
8422MDF 2440 x 1220 x 22mm<br />
8425MDF 2440 x 1220 x 25mm<br />
8430MDF 2440 x 1220 x 30mm<br />
8438MDF 2440 x 1220 x 38mm<br />
8445MDF 2440 x 1220 x 45mm<br />
8512MDF 2440 x 1525 x 12mm<br />
8518MDF 2440 x 1525 x 18mm<br />
1046MDF 3050 x 1220 x 6mm<br />
1049MDF 3050 x 1220 x 9mm<br />
10412MDF 3050 x 1220 x 12mm<br />
10415MDF 3050 x 1220 x 15mm<br />
10418MDF 3050 x 1220 x 18mm<br />
10425MDF 3050 x 1220 x 25mm<br />
10430MDF 3050 x 1220 x 30mm<br />
10512MDF 3050 x 1525 x 12mm<br />
10518MDF 3050 x 1525 x 18mm<br />
10525MDF 3050 x 1525 x 25mm<br />
Light MDF<br />
A specially engineered MDF ideal where high quality coupled with low<br />
weight is required.<br />
• 20% lighter than standard MDF<br />
Code<br />
Size<br />
8412LIGHT 2440 x 1220 x 12mm<br />
8415LIGHT 2440 x 1220 x 15mm<br />
8418LIGHT 2440 x 1220 x 18mm<br />
8425LIGHT 2440 x 1220 x 25mm<br />
8430LIGHT 2440 x 1220 x 30mm<br />
8438LIGHT 2440 x 1220 x 38mm<br />
8445LIGHT 2440 x 1220 x 45mm<br />
10418LIGHT 3050 x 1220 x 18mm<br />
10425LIGHT 3050 x 1220 x 25mm<br />
V313 (Moisture Resistant) MDF<br />
For use in areas of high humidity such as kitchens and bathrooms.<br />
Code<br />
Size<br />
846MRMDF 2440 x 1220 x 6mm<br />
849MRMDF 2440 x 1220 x 9mm<br />
8412MRMDF 2440 x 1220 x 12mm<br />
8415MRMDF 2440 x 1220 x 15mm<br />
8418MRMDF 2440 x 1220 x 18mm<br />
8425MRMDF 2440 x 1220 x 25mm<br />
8430MRMDF 2440 x 1220 x 30mm<br />
10418MRMDF 3050 x 1220 x 18mm<br />
Medex (Exterior) MDF<br />
A fully exterior MDF, as long as finishing instructions are adhered to<br />
(copies on request).<br />
Code<br />
Size<br />
8412XMDF 2440 x 1220 x 12mm<br />
8418XMDF 2440 x 1220 x 18mm<br />
8425XMDF 2440 x 1220 x 25mm<br />
Bead & Butt Effect MDF<br />
Grooved at 100mm centres down the<br />
long length. For covering walls and<br />
ceilings, and fronts of cupboard doors<br />
etc.<br />
Code<br />
Size<br />
8269MDFBBTG 2440 x 706 x 9mm T&G 2EL Unfaced<br />
1049MDFBB 3050 x 1220 x 9mm (Unfaced) Long Groove<br />
10418MDFBB 3050 x 1220 x 18mm (Unfaced) Long Groove<br />
Bead & Butt MDF V313<br />
(Moisture Resistant)<br />
Moisture Resistant version used for<br />
kitchens and bathrooms. Grooved at<br />
100mm centres.<br />
‘<strong>Sh</strong>aker’ profile<br />
Code<br />
Size<br />
849MRMDFBB 1220 x 2400 x 9mm - cross groove<br />
849MRMDFBBLG 2440 x 1200 x 9mm - long groove<br />
1049MRMDFBBLG 3050 x 1220 x 9mm - long groove<br />
849MDFSH 2440 x 1200 x 9mm ‘<strong>Sh</strong>aker’ Profile - long groove<br />
For veneered versions, see under ‘Decorative <strong><strong>Sh</strong>eet</strong> Material’.<br />
Flexible MDF<br />
• create shapes, go round bends, very versatile<br />
• uses include shopfitting, contoured wall features, bar fronts, columns,<br />
kitchen, bedroom and office furniture<br />
• very cost effective<br />
<strong>Sh</strong>ort Grain (Bend 1220mm Width)<br />
Code<br />
Size<br />
846MDFFS 1220 x 2440 x 6mm<br />
Long Grain (Bend 2440mm Width)<br />
846MDFFL 2440 x 1220 x 6mm<br />
For Decorative and Veneered MDF, see under<br />
‘Decorative <strong><strong>Sh</strong>eet</strong> Material’<br />
ALL MDF SHOULD BE SEALED WHEN<br />
USED IN ENCLOSED AREAS.<br />
Specifications subject to change without notice.<br />
17
Fire Rated <strong><strong>Sh</strong>eet</strong> Material<br />
Pyrok 5 Star or Viroc (Class ‘0’)<br />
A cement bonded particle board.<br />
• suitable for internal and external use<br />
• asbestos free, no hazardous volatiles, non-aggressive dust<br />
• cut, plane, drill, router or screw into it<br />
Code<br />
Size<br />
846PROC 2440 x 1220 x 6mm<br />
426TB<br />
1218 x 618 x 6mm moisture resistant<br />
Masterboard<br />
Consists of a high calcium silicate matrix reinforced with cellulose, which is<br />
then high pressure steam cured.<br />
• high dimensional and chemical stability, with low alkalinity<br />
• rated as Class ‘0’ and Class ‘1’ Surface Spread of Flame<br />
• provides up to 30 min. of fire protection<br />
• immune to insect and vermin attack<br />
• smooth 1 face, lightly textured reverse<br />
• asbestos free<br />
Code Size<br />
846MB 2440 x 1220 x 6mm<br />
849MB 2440 x 1220 x 9mm<br />
8412MB 2440 x 1220 x 12mm<br />
Supalux<br />
A high performance building board made from calcium silicate reinforced<br />
with selected fibres and fillers.<br />
• rigid, strong yet lightweight<br />
• non-combustible, providing up to 4 hours fire protection<br />
• moisture tolerant, will not rot or decay<br />
• smooth face can be decorated<br />
• easy to handle and work<br />
• asbestos free<br />
Code Size<br />
846SL 2440 x 1220 x 6mm<br />
849SL 2440 x 1220 x 9mm<br />
8412SL 2440 x 1220 x 12mm<br />
M.D.F. (Class ‘I’)<br />
Code<br />
846MDFFR1<br />
849MDFFR1<br />
8412MDFFR1<br />
8418MDFFR1<br />
M.D.F. (Class ‘O’)<br />
Code<br />
8412MDFFRO<br />
8418MDFFRO<br />
Size<br />
2440 x 1220 x 6mm<br />
2440 x 1220 x 9mm<br />
2440 x 1220 x 12mm<br />
2440 x 1220 x 18mm<br />
Size<br />
2440 x 1220 x 12mm<br />
2440 x 1220 x 18mm<br />
Plywood Far East/Brazilian (Class ‘I’)<br />
Code<br />
844FEPFR1<br />
846FEPFR1<br />
849FEPFR1<br />
8412FEPFR1<br />
8418FEPFR1<br />
Size<br />
2440 x 1220 x 4mm<br />
2440 x 1220 x 6mm<br />
2440 x 1220 x 9mm<br />
2440 x 1220 x 12mm<br />
2440 x 1220 x 18mm<br />
Plywood Far East/Brazilian (Class ‘0’)<br />
Code<br />
846FEPFRO<br />
8412FEPFRO<br />
8418FEPFRO<br />
Size<br />
2440 x 1220 x 6mm<br />
2440 x 1220 x 12mm<br />
2440 x 1220 x 18mm<br />
Water & Fire Resistant<br />
<strong><strong>Sh</strong>eet</strong> Material<br />
Hardibacker<br />
Made from Portland cement and ground sand with cellulose additives, this<br />
board is particularly resistant to water and as such is used in bathrooms,<br />
kitchens and utility rooms. Ideal as a backing board for tiling etc.<br />
Generally Hardibacker 250 is used for floor and worktop applications,<br />
whilst Hardibacker 500 is used for walls, although the latter can also be<br />
used for floors and worktops.<br />
• highly recommended where high levels of moisture exist<br />
• non-combustible, conforms to Class ‘O’ Surface Spread of Flame<br />
• vermin and rot proof<br />
• strong and durable, yet light and easy to work with (wear mask)<br />
• bonding coat on surface assists tiling<br />
• meets ISO 8226<br />
• British Board of Agrement (BBA) approved<br />
• 10 year product warranty<br />
• asbestos and formaldehyde free<br />
Code<br />
Size<br />
536HB 1500 x 900 x 6mm Hardibacker 250<br />
5312HB 1500 x 900 x 12mm Hardibacker 500<br />
23460973 Alkaline Resistant Joint Tape - 20m roll<br />
Superflex<br />
A cellulose fibre reinforced cement based board that is both tough and<br />
flexible, making it an extremely versatile and adaptable building board.<br />
• water resistant, very durable<br />
• rated as Class ‘0’ and Class ‘1’ Surface Spread of Flame<br />
• physical properties not degraded by temperatures from 0deg to 105<br />
deg C<br />
• easy to work, can be cut, drilled or nailed<br />
• will not rot - unaffected by insects, termites and vermin<br />
• smooth surface can be decorated with acrylic paints<br />
• asbestos free<br />
Code<br />
849SF<br />
Size<br />
2440 x 1220 x 9mm<br />
18<br />
Specifications subject to change without notice.
Pre-Cut Handi-Panels<br />
- Cut To Size<br />
Far Eastern/Brazilian WBP Plywood<br />
Code Size<br />
20742409 1220* x 610* x 5.5/6mm<br />
20796563 2440 x 610* x 5.5/6mm<br />
20753498 1220 x 1220* x 5.5/6mm<br />
20761813 1220* x 610* x 9mm<br />
20794651 2440 x 610* x 9mm<br />
20772901 1220 x 1220* x 9mm<br />
20781224 1220* x 610* x 12mm<br />
20735388 2440 x 610* x 12mm<br />
20792312 1220 x 1220* x 12mm<br />
20743703 1220* x 610* x 18mm<br />
20795085 1220 x 1220* x 18mm<br />
Dimensions marked * are nominal<br />
MDF Medium Density Fibreboard<br />
Code Size<br />
20734060 1220 x 610* x 6mm<br />
20765880 1220 x 1220* x 6mm<br />
20738181 2440 x 610* x 6mm<br />
20720049 1220 x 610* x 9mm<br />
20771430 1220 x 1220* x 9mm<br />
20722814 2440 x 610* x 9mm<br />
20774202 1220 x 610* x 12mm<br />
20776978 1220 x 1220* x 12mm<br />
20725366 2440 x 610* x 12mm<br />
482418MDF 1220 x 610* x 18mm<br />
484818MDF 1220 x 1220* x 18mm<br />
961218MDF 2440 x 305* x 18mm<br />
961818MDF 2440 x 458* x 18mm<br />
962418MDF 2440 x 610* x 18mm<br />
963018MDF 2440 x 762* x 18mm<br />
20790844 1220 x 610* x 25mm<br />
20742225 1220 x 1220* x 25mm<br />
20793616 2440 x 610* x 25mm<br />
Hardboard<br />
Standard<br />
A dense, highly compressed wood fibre sheet material, very smooth on<br />
one side with a mesh pattern on the reverse.<br />
Code Size<br />
84H 2440 x 1220 x 3.2mm<br />
42H 1220 x 610 x 3.2mm<br />
Oil Tempered<br />
• denser and stronger than standard hardboard<br />
• greater resistance to moisture<br />
• uses include farm buildings, signs, packaging etc<br />
Code Size<br />
84HT 2440 x 1220 x 3.2mm<br />
Perforated/Pegboard<br />
With regular holes.<br />
Code Size<br />
84HP 2440 x 1220 x 3.2mm<br />
846HP 2440 x 1220 x 6mm<br />
Ivory Insulation Board<br />
Low density fibre board faced one side with cream paper, which can be<br />
painted. Interior use only.<br />
Code Size<br />
8412I 2440 x 1220 x 12.7mm<br />
Pinboard<br />
A medium density board (not to be confused with MDF) ideal for notice<br />
boards and train set bases.<br />
Code Size<br />
849P 2440 x 1220 x 8/9mm<br />
Sundeala ‘K’ Board<br />
A very high quality medium density fibreboard, but not as hard as MDF.<br />
• internal use only such as shopfitting, display and pinboards<br />
Code Size<br />
846SUN 2440 x 1220 x 6mm<br />
849SUN 2440 x 1220 x 9mm<br />
8412SUN 2440 x 1220 x 12mm<br />
19
Screen Panel<br />
Decorative perforated patterns on either hardboard, MDF or Aluminium<br />
• Plain can be decorated. White and veneered also available<br />
• creates a wide range of design possibilities<br />
• use for making dividers, screening, shutters, radiator cabinets and<br />
shopfitting etc<br />
Hardboard/MDF Screenpanel - border all four edges<br />
Code<br />
Size<br />
23137400 RC70MDF 1830 x 610mm Nevada Plain<br />
23140172 RC71 1830 x 610mm Nevada White<br />
23191563 RC64 1830 x 610mm Colorado Plain<br />
23194335 RC63 1830 x 610mm Kansas Plain<br />
23197107 RC62MDF 1830 x 610mm Ohio Plain<br />
23148499 RC60 1830 x 610mm Dakota Plain<br />
23199880 RC72 1830 x 610mm Dakota White<br />
23151260 RC61MDF 1830 x 610mm Oregon Plain<br />
23154049 RC73 1830 x 610mm Oregon White<br />
23148215 RC80 1830 x 610mm Filigree Plain<br />
23145672 RC83 1830 x 610mm Filigree White<br />
23120129 RC65MDF 1830 x 610mm Fleur De Lys Plain<br />
23153660 RC65W 1830 x 610mm Fleur De Lys White<br />
23178618 RC77 1830 x 610mm Fleur De Lys Plain Portrait<br />
23135543 RC25 1830 x 610mm Mackintosh Plain<br />
23192485 RC26 1830 x 610mm Corbusier Plain<br />
23149410 RC66 1830 x 610mm Florida Plain<br />
23186354 RC75 1830 x 610mm Teddy Plain<br />
23163270 RC76 1830 x 610mm Kentucky Plain<br />
Perforated 6mm MDF - border all four edges<br />
Code<br />
23177550 RC67 1828 X 607mm Louisiana<br />
23134485 RC68 1828 X 607mm Cape Cod<br />
23191426 RC69 1828 X 607mm New Orleans<br />
23151123 RC74 1828 X 607mm Texas<br />
Veneered 2 sides - border two long edges, one short<br />
Code<br />
23168091 RC84 1830 x 610mm Oregon Pine Veneered<br />
23184510 RC610AK 1830 x 610mm Oregon Oak Veneered<br />
23126329 RC88 1830 x 610mm Fleur De Lys Pine Veneered<br />
23131651 RC650AK 1830 x 610mm Fleur De Lys Oak Veneered<br />
23121157 RC86 1830 x 610mm Nevada Pine Veneered<br />
23162150 RC700AK 1830 x 610mm Nevada Oak Veneered<br />
Aluminium Effect one side - border two long edges, one short<br />
Code<br />
23174191 RC61AL 1830 x 610mm Oregon<br />
23133891 RC70AL 1830 x 610mm Nevada<br />
23190825 RC25AL 1830 x 610mm Mackintosh<br />
23171756 RC26AL 1830 x 610mm Corbusier<br />
Aluminium - border two short edges<br />
Code<br />
23145733 RC40P 1000 x 670mm Gold Small Clover<br />
23162372 RC42P 1000 x 670mm White Small Clover<br />
23124844 RC44P 1000 x 670mm Gold Large Clover<br />
23152571 RC46P 1000 x 670mm Gold Oriental<br />
23140561 RC44ALP 1000 x 670mm Silver Large Clover<br />
23148888 RC46ALP 1000 x 670mm Silver Oriental<br />
23198241 RC48P 1000 x 670mm Gold Maze<br />
23164963 RC48BRP 1000 x 670mm Bronze Maze<br />
Aluminium - no border<br />
Code<br />
23135932 RC45P 1000 x 670mm Gold Interwoven<br />
23188556 RC47P 1000 x 670mm Gold Mesh<br />
23191778 RC45ALP 1000 x 670mm Silver Weave<br />
23149397 RC45 2000 x 1000mm Gold Interwoven<br />
23156234 RC47 2000 x 1000mm Gold Mesh<br />
Aluminium - border two long edges<br />
Code<br />
Size<br />
23176256 RC40 2000 x 1000mm Gold Small Clover<br />
23187351 RC41 2000 x 1000mm Silver Small Clover<br />
23169241 RC44 2000 x 1000mm Gold Large Clover<br />
23181595 RC46 2000 x 1000mm Gold Oriental<br />
Screen Moulding<br />
Code<br />
Size<br />
23139008 RC100 2 metre Single 3mm Groove 44 x 22mm<br />
23150102 RC101 2 metre Double 3mm Groove 44 x 22mm<br />
23135345 RC102 2 metre Single 3mm Groove 70 x 22mm<br />
23143579 RC103 2 metre Single 6mm Groove 44 x 22mm<br />
23134285 RC104 2 metre Single 4mm Groove 44 x 22mm<br />
Wooden Trellis<br />
Code<br />
Size<br />
23160309 RC90 1830 x 610mm Pine 6mm Thick<br />
23196353 RC92 1830 x 610mm Oak 6mm Thick<br />
23121300 RC99L 1905 x 445mm Pine 12.7mm Thick<br />
23197657 RC99S 610 x 445mm Pine 12.7mm Thick<br />
OREGON<br />
RC73 Hardboard, white one side only<br />
• 42% Open<br />
• 3mm thick<br />
FLEUR DE LYS<br />
RC65MDF Natural<br />
• 45% Open<br />
• 3mm thick<br />
RC44 GOLD<br />
• 2000 x 1000 x 1mm (6’6” x 3’3”)<br />
• 43% open - border: 2 long edges<br />
RC44P GOLD<br />
• 1000 x 670 x 1mm (3’3” x 2’2”)<br />
• 43% open - border: 2 short edges<br />
DAKOTA<br />
RC72 Hardboard, white one side only<br />
• 30% Open<br />
• 3mm thick<br />
RC45AL SILVER<br />
• 2000 x 1000 x 1mm (6’6” x 3’3”)<br />
• 40% open - no border<br />
RC45ALP SILVER<br />
• 1000 x 670 x 1mm (3’3” x 2’2”)<br />
• 40% open - no border<br />
20