In System Programming (ISP) for ATMEL chips

In System Programmer (ISP) for ATMEL micro controllers
http://www.ikalogic.com/isp.php
Page 9 of 29
26-02-2008
on: 07 Apr 2007
Posted by:
ikalogic
on: 07 Apr 2007
It's nice to hear that amol! keep the good work!thx for your comment.
Reply With Quote
Reply With Quote
Posted by:
jun_China
on: 08 Apr 2007
Posted by:
ikalogic
on: 08 Apr 2007
Posted by:
Chris Keays
on: 11 Apr 2007
Posted by:
chris Keays
on: 11 Apr 2007
Posted by:
ikalogic
on: 11 Apr 2007
Posted by:
Jawad Lateef
on: 11 Apr 2007
Posted by:
ikalogic
on: 11 Apr 2007
I would like to try again,because i have tried several times,but failure,i hope I will be
successful.thank you!
Reply With Quote
[Quoting: jun_China] I would like to try again,because i have tried several times,but
failure,i hope I will be successful.thank you!
well yes, try again, and again.. beleive me, it's worth the hard work! may it not work this
time, leave a message here with your observations, and i'll help you to get it working.
Reply With Quote
Do yourself a favor and get the real software on the atmel site.This program works sometimes
and sometimes it is very troublesome!This code is just another type like asim Khan's program.
It should not matter how long the cable is as long as it is shielded (no longer than 3 ft, mind
you)Using the parallel port like this is very troublesome. Because all PC's are different, and all
parallel ports are different, it can work perfectly for one person and NEVER work for the next
guy.I could read the signature bytes every single time, but never program the device. I have
more than one 89S51 and they are NOT damaged! It is the poorly written software. Good Luck
Reply With Quote
[Quoting: Chris Keays] Do yourself a favor and get the real software on the atmel site.This
program works sometimes and sometimes it is very troublesome!This code is just another
type like asim Khan's program. It should not matter how long the cable is as long as it is
shielded (no longer than 3 ft, mind you)Using the parallel port like this is very troublesome.
Because all PC's are different, and all parallel ports are different, it can work perfectly for
one person and NEVER work for the next guy.I could read the signature bytes every single
time, but never program the device. I have more than one 89S51 and they are NOT
damaged! It is the poorly written software. Good Luck
I forgot to add, with my current setup (nothing changed) I used the ISP software I
downloaded on the atmel site and it worked perfectly, same cable, same programmer, same
PC! So what does that tell you??
Well, that tells me i've got to try ATMEL's software...
Reply With Quote
[Quoting: chris Keays] I forgot to add, with my current setup (nothing changed) I used the
ISP software I downloaded on the atmel site and it worked perfectly, same cable, same
programmer, same PC! So what does that tell you??
Plzz tell me can i download program with this programmer and cable in 89C51.
Reply With Quote
Reply With Quote
[Quoting: Jawad Lateef] Plzz tell me can i download program with this programmer and
cable in 89C51.
No, this programmer is only compatible with ISP powered devices like the 89SXX. Note that
you'r program will work on a 89S51 exactly as it will work on a 89C51.
Reply With Quote
Posted by:
vinoth kumar
on: 13 Apr 2007
Posted by:
waterloo
on: 14 Apr 2007
very nice
I think it is good.
Reply With Quote
Reply With Quote
Posted by:
jun_China
on: 14 Apr 2007
[Quoting: ikalogic]
[Quoting: jun_China] I would like to try again,because i have tried several times,but
failure,i hope I will be successful.thank you!