FlexFrame Specification Guide - Steelcase

FlexFrame
Determining LED Light Wattage
Determining LED Light Wattage
Shelf Width Light Wattage
23 1 ⁄16" 4.8
29 1 ⁄16" 5.6
35 1 ⁄16" 7.3
30" 30" 30" 30" 30"
4 Shelves with LED Lights
9 Shelves with LED Lights
4 (lights) x 5.6W = 22.4W
9 (lights) x 5.6W = 50.4W
Use 30W light kit
Use 60W light kit
Legend
= LED Light
.
Light Wattage
LED lights are optional for shelves, bins, and drawers. A light kit must be specified to connect the shelf lights to power and switch them on and off. The light kit
needed depends on the total wattage of all of the LED lights used for a workwall. Different width shelves have different wattages:
To Calculate Total Wattage For A Workwall:
• Determine how many shelves of each width have been specified with LED lights.
• Multiply quantity of shelves by light wattage for each width.
• Add up total watts.
• If total watts is 30 watts or less, the 30 watt light kit should be specified. If the total watts is between 30W and 60W, the 60 watt light kit should be specified.
.
70 FlexFrame Specification Guide
November 2010