FlexFrame Specification Guide - Steelcase

FlexFrame
Skins
.
Skins that are not used in a
shelf or bin come standard
with painted metal blades on
the sides. This is to provide
a consistent aesthetic with
other components.
Skins for use with
shelves and bins are
unique and do not have a
blade. The blade is already
standard on the shelf or bin.
Skins ship with attachment
hardware.
Skins can be removed and
reconfigured.
Skins align with the front
edge of the workwall frame.
Tip: Except the skin for bin is
set back an additional 1" to
allow for more storage
space.
Technology skins allow
convenient user access to
power, data, and light
switches.
Technology skins are
available in corded, hardwire,
and modular versions.
.
Corded technology
skins have an 8' cord with
a 15 amp grounded plug.
Hardwire technology
skins have an 8' length of
flexible metal conduit.
Modular technology
skins have an 8' length of
modular harness with a male
connector. Modular technology
skins include an inline
and H connector to allow it
to connect to modular power
in a variety of applications.
Modular technology skins
are always wired to Line 1.
cSee Using Modular Power
on page 62 for diagram
examples.
Technology skins
accommodate data and
power needs. Technology
skins are available with
Data/Power/Power or
Data/Power/Switch
configurations.
Technology skins that
have Data/Power/Power
have space for two customer
supplied Extron AAP plates
and two simplex receptacles.
Technology skins that
have Data/Power/Switch
have space for two customer
supplied Extron AAP plates,
one simplex receptacle, and
one opening for the LED
light switch included with
the light kit. The LED light
switch is field installed in
the technology skin.
.
Architectural Adapter
Plates (AAPs) provide
access to data, audio, video,
telephone, and other technologies.
AAPs are available
from Extron Electronics. For
information on AAPs and to
find an Extron Electronics
dealer, contact Extron at
800.633.9876 or online at
www.extron.com.
3 /4"
Cable management
skins feature a 3 /4"H flexible
strip that allows cords
and cables to be routed
behind the skin. The flexible
strip also allows for the skin
to be easily removed without
tools.
Tip: The flexible strip is on
the bottom edge of the skin.
A cable management skin
for double shelf or bin may
be flipped so the flexible
strip is on the top edge of
the skin.
TV attachment skins
are available as centered or
spanning.
Centered TV attachment
skins are used to
center a TV on one skin in
one section.
.
Spanning TV attachment
skins are specified
as a left and right pair. This
allows a TV to be centered
over two skins in two adjacent
sections.
Tip: Adjacent sections must
be of the same width.
Cut-outs on TV attachment
skins allow wires to
run behind the workwall. The
cut-out is not finished but will
be concealed behind the TV.
TV attachment skins
are available with either a
small bracket for monitors
32" or smaller or a large
bracket for monitors larger
than 32". Monitors can be
adjusted vertically above or
below centerline. Additional
adjustment is available in
the TV bracket itself.
.
Connections
Skins for use with
shelves fit in between the
blades and attach with
provided hardware.
Skins attach using spring
clips and can be easily
removed, replaced, and
repositioned.
.
Skins
FlexFrame Specification Guide cSkins, continued 47
November 2010