FlexFrame Specification Guide - Steelcase

FlexFrame
Shelves, Bins, and Drawers
Shelves, bins, and
drawers are available in a
variety of sizes and configurations
to provide storage.
cSpecifying, pages 77-80
Double Shelves
Shelves, bins, and
drawers have an optional
wire management cut-out.
Upper Single Shelves
Painted metal blades
are standard on each side of
shelves, bins, and drawers.
Lower Single Shelves
Shelves, bins, and
drawers are available in
Low-Pressure Laminate or
wood.
Drawer
Bin
Actual Dimensions
Double Shelf Single Shelf- Bin Drawer
Lower or
Upper
Depth 12 3 ⁄4" or 19" 12 3 ⁄4" or 19" 19" 19"
Width 23 1 ⁄16", 29 1 ⁄16", 23 1 ⁄16", 29 1 ⁄16", 23 1 ⁄16", 29 1 ⁄16", 23 1 ⁄16", 29 1 ⁄16",
or 35 1 ⁄16" or 35 1 ⁄16" or 35 1 ⁄16" or 35 1 ⁄16"
. Height 8 1 ⁄4" or 16 1 ⁄2" 8 1 ⁄4" or 16 1 ⁄2" 16 1 ⁄2" 8 1 ⁄4"
Bin doors recess into the
case when opened.
.
Product Details
Shelves, bins, and
drawers are available in
Low-Pressure Laminate or
wood.
A painted metal blade
on each side is standard
on all shelves, bins, and
drawers to create a consistent
aesthetic with skins.
Bins and drawers come
standard with a flush pull.
Shelves, bins, and
drawers come standard
with a wire management
cut-out to route cords and
cables. An option of no
cut-out is available. The
cut-out is not finished. An
optional wire cut-out cover
is available.
Tip: Double shelves, bins,
and drawers have two wire
cut-outs, one on the top and
one on the bottom of the unit.
.
36 FlexFrame Specification Guide
November 2010