FlexFrame Specification Guide - Steelcase

FlexFrame
Inner Vertical Frame Pieces
.
Threaded strips can be
adjusted to level shelves,
bins, drawers, and skins.
.
Connections
T-bracket
T-shaped wall brackets
attach to the building wall
using customer/installer
supplied fasteners.
Workwall frame verticals
attach to T-shaped
wall brackets using supplied
set screws. The top most
screw will go through a slot
in the T-shaped wall bracket
to serve as a safety catch.
22 5 /8" 47 15 /16" 64 7 /16" 80 15 /16"
Four set screws are
visible on both sides of
every workwall frame
vertical.
Tip: Set screws may be
concealed on inside edge of
frame vertical by workwall
components.
.
Wiring and Cabling
1 3 /4"
Inner vertical frame
pieces used with
47 15 ⁄16", 64 7 ⁄16", or
80 15 ⁄16" H workwall frames
come standard with a cutout
for wire management
near the bottom of the vertical
frame piece.
5 /8"
1 5 /16"
1"
Inner vertical frame
pieces used with
22 5 /8"H workwall frames
have a smaller cut-out
designed to manage LED
light cords and not power
cords.
.
Surface Materials
Inner Vertical Frame
Piece
• 8043 Clear Anodized
Aluminum
Threaded Strip
• Black
.
.
Workwall
FlexFrame Specification Guide 31
November 2010