xmega a3u - Elfa

XMEGA A3U
36.3 Current consumption
Table 36-4. Current consumption for Active mode and sleep modes.
Symbol Parameter Condition Min. Typ. Max. Units
V CC = 1.8V 120
32kHz, Ext. Clk
V CC = 3.0V 270
V CC = 1.8V 350
µA
Active Power
1MHz, Ext. Clk
consumption (1)
V CC = 3.0V 697
V CC = 1.8V 658 700
2MHz, Ext. Clk
1.1 1.4
V CC = 3.0V
mA
32MHz, Ext. Clk 10.6 15
V CC = 1.8V 4.3
32kHz, Ext. Clk
V CC = 3.0V 4.8
V CC = 1.8V 78
Idle Power
1MHz, Ext. Clk
µA
consumption (1)
V CC = 3.0V 150
V CC = 1.8V 150 350
2MHz, Ext. Clk
290 600
V CC = 3.0V
32MHz, Ext. Clk 4.7 7.0 mA
I CC
Power-down power
consumption
Power-save power
consumption (2)
Reset power consumption
T=25°C
0.1 1.0
V CC = 3.0V
T = 85°C 1.8 5.0
WDT and Sampled BOD enabled,
T=25°C
WDT and Sampled BOD enabled,
T = 85°C
RTC from ULP clock, WDT and
sampled BOD enabled, T = 25°C
RTC from 1.024kHz low power
32.768kHz TOSC, T = 25°C
RTC from low power 32.768kHz
TOSC, T = 25°C
Current through RESET pin
substracted
V CC = 3.0V
Notes: 1. All Power Reduction Registers set.
2. Maximum limits are based on characterization, and not tested in production.
V CC = 1.8V 1.2
V CC = 3.0V 1.3
1.3 3.0
3.1 7.0
V CC = 1.8V 0.6 2
V CC = 3.0V 0.7 2
V CC = 1.8V 0.8 3
V CC = 3.0V 1.0 3
V CC = 3.0V 250
µA
8386B–AVR–12/11
72