RevisionReport DigiPara Liftdesigner Generated By: Karin ...

RevisionReport DigiPara Liftdesigner
Generated By:
Karin Klingenberg
DigiPara GmbH
21/08/2012 11:46 AM
SwApplicationDefect-Name Category: SwApplicationCategory-Name Subject Designation for History Created Date Last Modified Date
SwApplicationName: DigiPara Liftdesigner (45 records)
SwApplicationVersion-Name: LD_5_04_0085 (7 records)
D-0194 User Interface Bug: main project data window - guide rails Manufacturer for guide rails cannot be changed in the main
project data window. This issue has been solved.
04.07.2012 21.08.2012
D-0161 LD Product Library Add Riedl door type "Liz" We have added the following doors and door drive to the
Riedl library.
Doors:
- Liz2 left/right opening
- Liz4 central opening
Door drive: Siemens AT 12/18
23.03.2012 21.08.2012
D-0191 LD Product Library Add machine bed for planet gear to the Common
We have added the following machine bed to the Common 22.06.2012 21.08.2012
Components library
Components library:
- Machine bed for planet gear with deflection sheave on the
right/left side
D-0159 LDX Hebrew characters are now supported This problem has been fixed. 22.03.2012 03.08.2012
D-0203 LDX Support for Double Decker Elevators This feature has been added. Select a 1:1 double decker car
frame to add a second cabine.
03.08.2012 03.08.2012
D-0192 LD Product Library New manufacturer: Torin Drive We have added Torin Drive gearless traction machines to
the DigiPara Liftdesigner manufacturer library:
- GTS (2:1 suspension, with/without support)
- GTW8 (2:1 suspension)
26.06.2012 09.07.2012
D-0127 LD Product Library Add Wittur door type "MDS1" We have added new shaft and cabin doors to the Wittur
library.
8/11/2011 22.06.2012
Shaft doors:
- MDS1 TY 01/C (EN81-58 E120/ EN81-58 E120 EW60/ BS476
120´/GOST E30)
- MDS1 TY 11/R (EN81-58 E120/ EN81-58 E120 EW60/ BS476
120´/GOST E30)
- MDS1 TY 11/L (EN81-58 E120/ EN81-58...

SwApplicationVersion-Name: LD_5_04_0075 (11 records)
D-0176 User Interface H0 dimension cannot be modified in Extended Buffer dialog This problem has been fixed. 26.04.2012 22.06.2012
D-0190 LDX Improvement: DWG file When saving drawings as DWG file, DigiPara Liftdesigner
now supports transparency values (e.g. for glass elements).
Transparancy values are visible in AutoCAD 2004 version
19.06.2012 22.06.2012
and higher.
D-0170 LDX Ignore SHEET_CONDITION for manual sheet template
loading
This problem has been fixed. 03.04.2012 22.06.2012
D-0130 LD Product Library Update: Sicor library We have added new machines to the Sicor library:
- MR7, MR8, MR13, MR16, MR35 traction machines and
appropriated machine frames
- SG-20-180A and SG-40-180A gearless traction machines
25/11/2011 22.06.2012
D-0156 LD Product Library Update: Sassi library We have added new machines and frames to the Sassi
library:
- G200-L1, G300-L0/L1, G400-L0/L1/L2, G500-T1/T2 gearless
traction machines
- High frame with deflection sheave, flat frame with
deflection sheave and flat frame with two deflection
sheaves fo...
6/03/2012 22.06.2012
D-0158 LDX Dimension text is not placed properly In case the view frame text height is deviating, the text was
wrongly placed. This problem has been fixed.
16.03.2012 22.06.2012
D-0171 LDX New: DigiPara Liftdesigner BIM Exchange for Autodesk Revit This new feature allows you to save DigiPara Liftdesigner
drawings as LD BIM files (*.ldBIM) to load a 3-D elevator
BIM model into Autodesk Revit software.
03.04.2012 22.06.2012
D-0172 LDX New: SVG export (2-D Internet vector format) SVG files can now be exported from DigiPara Liftdesigner.
This 2-D drawing format can be displayed in almost any
browser and is useful for displaying 2-D data on mobile
03.04.2012 22.06.2012
devices (like iPad).
D-0189 LDX New: 3-D DWG export It is now possible to export elevators drawings as 3-D DWG
files.
19.06.2012 22.06.2012
D-0188 LD Product Library Add 4:1 car frames & duty tables Metric 4:1 traction elevators can now be selected from the
Shaftwizard in DigiPara Liftdesigner.
15.06.2012 21.06.2012
D-0178 LDX New Option for Shaft Lamplist: Fix at separator beam set flag Shaft0.LampList.LPL_MODE =| 0x0008 27.04.2012 27.04.2012
SwApplicationVersion-Name: LD_5_04_0063 (10 records)
D-0155 LDX Improvements for symbolic vertical section In some cases (small floor to floor height, elevator groups)
the symbolic vertical section looked wrong. This problem
has been fixed. Improved Imperial default values for
symbolic section.
D-0151 EN 81 Grooving consideration - V-Groove with undercut Although, the undercut for the traction sheave v-groove was
not defined in the Grooving Consideration settings of the
Rope Calculation, it still was taken into acocunt in the
calculation reports. This problem has been fixed.
D-0149 EN 81 Load Conditions The Results for "Normal Operation" and "Emergency
braking" situation on the Car/ Counterweight side were not
calculated correctly according to the default Acceleration/
Deceleration value. This problem has been fixed.
23.02.2012 22.03.2012
03.02.2012 27.02.2012
03.02.2012 27.02.2012

D-0150 EN 81 Acceleration / Deceleration of the Car The direction or sense of the acceleration used for all four
cases in the emergency braking situation (both on the car
and counterweight sides) was wrong. This problem has been
fixed.
D-0152 LDX Characters "\pxqc;" appear in the drawing "\pxqc;" and several similar texts are escape sequences
within Autocad to align text. These sequences are not
support. To avoid the wrongly displayed characters it is
automatically hidden.
D-0131 LDX Wrong Roping course in version 5.4.51 The roping course for a 2:1 counterweight with 2 pulleys
above was wrong in Build 5.4.51. This problem has been
fixed.
D-0082 EN 81 Shaft pit calculation In an elevator group with 2 or more similar shaft, the pit of
the 2nd shaft needs to by higher than the pit of the first
shaft, according to the calculation. This problem has been
solved
D-0148 LDX Metric dimensions are wrongly displayed in Imperial For small dimensions, dimension text was not properly
Projects
aligned. This problem has been fixed.
D-0147 LDX Hatch is missing in vertical section In case of face to face arrangements, hatch is missing in the
vertical section. Also some components are not displayed.
This problem has been fixed.
D-0146 LDX Specific text in dwg causes exception in LD Text like "%%U" causes an exception. This problem has been
fixed
SwApplicationVersion-Name: LD_5_04_0051 (9 records)
D-0113 LDX LD3-File format changed Several enhancements required the change of the file
format. Files saved with 5.4.51 and newer cannot be opened
with earlier versions.
D-0002 LDX m/cm support for External$ Expressions in MTEXT Using the #DispUnits# option, e.g.
External$("Shaft0.PTM.Y0","#DispUnits#") allows displaying
mm/cm units even in MTEXT. Minor bug fixes.
D-0112 LDX Bottom traction machine in wrong location In case of a group of elevators some of the traction
machines were at a wrong location. This problem has been
fixed
D-0108 User Interface Added: 3D STEP & SAT export to the file menu 2 new commands have been added to the file menu. An
additional license is required to use these 2 new exports.
03.02.2012 27.02.2012
03.02.2012 03.02.2012
12.12.2011 03.02.2012
08.07.2011 03.02.2012
03.02.2012 03.02.2012
03.02.2012 03.02.2012
03.02.2012 03.02.2012
28.09.2011 28.09.2011
01.04.2011 28.09.2011
28.09.2011 28.09.2011
16.09.2011 28.09.2011
D-0005 LDX Manual placed car ceiling lights forget location This problem has been solved. 19.04.2011 26.09.2011
D-0111 LDX Liftdesigner crahes when a SPLINE is in a dwg file LD crahes will displaying a dwg file that contains one or
more splines. This bug has been fixed.
23.09.2011 23.09.2011
D-0027 User Interface TXControl in Navigator does not work In the rare case of a text assigned to a product the text
display control was not shown and caused a warning in the
log. This problem has been fixed.
10.05.2011 23.09.2011
D-0109 User Interface Text Editor did not show Font Size No font size was displayed in the "Text Editor", the red error
mark appeared in the status bar indicating a program
exception. This issue has been solved.
20.09.2011 20.09.2011
D-0004 LDX CSU_USER_PGs and CY_USER_PGs are not available in LD These parameters have been added to the components and
can be used for product loading.
15.04.2011 20.09.2011
SwApplicationVersion-Name: LD_5_04_0045 (1 record)
D-0105 Escalators Truss width and total width can differ Added support for unequal truss and total width. 09.09.2011 09.09.2011
SwApplicationVersion-Name: LD_5_04_0044 (2 records)

D-0046 LDX User defined profiles are displayed, even if they are in front
of the projection plane
This problem has been fixed 27.05.2011 26.08.2011
D-0098 LDX Support for Belts added (ld3- file format changed) Added PG_GRP support to L_RopeTab. Add charact. points
(Code 180-189) for several belt-outlines to the group.
26.08.2011 26.08.2011
SwApplicationVersion-Name: LD_5_04_0043 (1 record)
D-0097 Escalators Intermediate Support "At the back of pit" Plan view section generation for intermediate support "At
the back of pit" fixed.
SwApplicationVersion-Name: LD_5_04_0042 (1 record)
12.08.2011 12.08.2011
D-0083 Escalators Enhanced Expression Parser for XML Interface XML mapping now supports = style expressions 14.07.2011 14.07.2011
SwApplicationVersion-Name: LD_5_04_0041 (3 records)
D-0063 Escalators Improved logic for handrail entry box and inner/outer
deckings
- Handrail entry box can now be geometrically "sliced"
infinitely
- Added mode to inner/outer deckings to disable automatic
profile generation and use a profile group instead
D-000002 LDX Empty BLOCKNAME in displayed DWG A dwg file was not displayed in the drawing, in case the dwg
contained a BLOCK without name. This problem has been
fixed.
D-0001
Grand Totals (45 records)
User Interface Dynamic Dimension Point for Buffer In case of hydraulic buffers, the top dynamic dimension
point was displayed in a wrong place. This problem has been
fixed
Confidential Information - Do Not Distribute
Copyright (c) 2000-2012 salesforce.com, inc. All rights reserved.
16.06.2011 17.06.2011
31.03.2011 17.06.2011
01.04.2011 11.04.2011