FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE
FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE FOAIE INFORMATIVÄ DOCUMENTE NORMATIVE
FI-mai-08 Fondul Naţional de Documente Normative 4 CEN/TR 15697:2008 Cement - Performance testing for sulfate resistance - State of the art report ICS 91.100.10 5 CEN/TR 15709:2008 Hardware for furniture - Terms for slide fittings for sliding doors and roll fronts ICS 97.140 6 CEN/TS 13388:2008 Copper and copper alloys - Compendium of compositions and products ICS 77.120.30; 77.150.30 7 CEN/TS 15209:2008 Tactile paving surface indicators produced from concrete, clay and stone ICS 11.180.30; 93.080.10 8 CEN/TS 15223:2008 Plastics piping systems - Validated design parameters of buried thermoplastics piping systems ICS 23.040.01 9 CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode ICS 91.100.50 10 CEN/TS 15511:2008 Postal services - Quality of service - Information available on postal services ICS 03.240 11 CEN/TS 15717:2008 Parquet flooring - General guideline for installation ICS 97.150 12 CEN/TS 81-82:2008 Safety rules for the construction and installation of lifts – Existing lifts - Part 82: Improvement of the accessibility of existing lifts for persons including persons with disability ICS 91.140.90 13 CWA 15740:2008 Risk-Based Inspection and Maintenance Procedures for European Industry (RIMAP) ICS 03.100.01 14 CWA 15832:2008 Humanitarian mine action - Follow-on processes after the use of demining machines. ICS 95.020 15 CWA 15833:2008 Humanitarian mine action - Quality management – Quality assurance (QA) and quality control (QC) for mechanical demining ICS 95.020 16 EN 10084:2008 Case hardening steels - Technical delivery conditions ICS 77.140.10 17 EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions ICS 77.140.50 18 EN 10216-5:2004/AC:2008 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes ICS 77.140.75; 23.040.10 19 EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements ICS 13.220.10 20 EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up ICS 13.110 21 EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining ICS 13.230; 73.100.01 8
FI-mai-08 Fondul Naţional de Documente Normative 22 EN 1159-3:2003/AC:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity ICS 81.060.30 23 EN 1173:2008 Copper and copper alloys - Material condition designation. ICS 77.120.30 24 EN 12077-2:1998+A1:2008 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices ICS 53.020.20 25 EN 12273:2008 Slurry surfacing – Requirements ICS 93.080.20 26 EN 12602:2008 Prefabricated reinforced components of autoclaved aerated concrete ICS 91.100.30 27 EN 12620:2002+A1:2008 Aggregates for concrete ICS 91.100.15; 91.100.30 28 EN 12859:2008 Gypsum blocks - Definitions, requirements and test methods. ICS 91.100.10 29 EN 12881-1:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests ICS 13.220.40; 53.040.20 30 EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test ICS 13.220.40; 53.040.20 31 EN 13161:2008 Natural stone test methods - Determination of flexural strength under constant moment ICS 73.020; 91.100.15 32 EN 13384-1:2002+A2:2008 Chimneys - Thermal and fluid dynamic calculation methods – Part 1: Chimneys serving one appliance ICS 91.060.40 33 EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection ICS 13.110; 13.220.01 34 EN 13557:2003+A2:2008 Cranes - Controls and control stations ICS 53.020.20 35 EN 13586:2004+A1:2008 Cranes. Access ICS 53.020.20 36 EN 13755:2008 Natural stone test methods - Determination of water absorption at atmospheric pressure ICS 73.020; 91.100.15 37 EN 14033-2:2008 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for working ICS 45.120; 93.100 38 EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations ICS 53.020.20 39 EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel ICS 77.180 40 EN 14710-2:2005+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements ICS 13.220.10 41 EN 14973:2006+A1:2008 Conveyor belts for use in underground installations – Electrical and flammability safety requirements 9
- Page 1 and 2: FI-mai-08 Fondul Naţional de Docum
- Page 3 and 4: FI-mai-08 Fondul Naţional de Docum
- Page 5 and 6: FI-mai-08 9. ГОСТ Р 52817-2007
- Page 7: FI-mai-08 4. СТБ 948-2007 5. С
- Page 11 and 12: FI-mai-08 Fondul Naţional de Docum
- Page 13 and 14: FI-mai-08 Fondul Naţional de Docum
- Page 15 and 16: FI-mai-08 Fondul Naţional de Docum
- Page 17 and 18: FI-mai-08 Fondul Naţional de Docum
- Page 19 and 20: FI-mai-08 Fondul Naţional de Docum
- Page 21 and 22: FI-mai-08 Fondul Naţional de Docum
FI-mai-08<br />
Fondul Naţional de Documente Normative<br />
4 CEN/TR 15697:2008 Cement - Performance testing for sulfate resistance - State of<br />
the art report<br />
ICS 91.100.10<br />
5 CEN/TR 15709:2008 Hardware for furniture - Terms for slide fittings for sliding doors<br />
and roll fronts<br />
ICS 97.140<br />
6 CEN/TS 13388:2008 Copper and copper alloys - Compendium of compositions and<br />
products<br />
ICS 77.120.30; 77.150.30<br />
7 CEN/TS 15209:2008 Tactile paving surface indicators produced from concrete, clay<br />
and stone<br />
ICS 11.180.30; 93.080.10<br />
8 CEN/TS 15223:2008 Plastics piping systems - Validated design parameters of buried<br />
thermoplastics piping systems<br />
ICS 23.040.01<br />
9 CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous<br />
temperature based on Low Shear Viscosity using a Dynamic<br />
Shear Rheometer in low frequency oscillation mode<br />
ICS 91.100.50<br />
10 CEN/TS 15511:2008 Postal services - Quality of service - Information available on<br />
postal services<br />
ICS 03.240<br />
11 CEN/TS 15717:2008 Parquet flooring - General guideline for installation<br />
ICS 97.150<br />
12 CEN/TS 81-82:2008 Safety rules for the construction and installation of lifts –<br />
Existing lifts - Part 82: Improvement of the accessibility of<br />
existing lifts for persons including persons with disability<br />
ICS 91.140.90<br />
13 CWA 15740:2008 Risk-Based Inspection and Maintenance Procedures for<br />
European Industry (RIMAP)<br />
ICS 03.100.01<br />
14 CWA 15832:2008 Humanitarian mine action - Follow-on processes after the use of<br />
demining machines.<br />
ICS 95.020<br />
15 CWA 15833:2008 Humanitarian mine action - Quality management – Quality<br />
assurance (QA) and quality control (QC) for mechanical<br />
demining<br />
ICS 95.020<br />
16 EN 10084:2008 Case hardening steels - Technical delivery conditions<br />
ICS 77.140.10<br />
17 EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold<br />
forming - Technical delivery conditions<br />
ICS 77.140.50<br />
18 EN 10216-5:2004/AC:2008 Seamless steel tubes for pressure purposes - Technical delivery<br />
conditions - Part 5: Stainless steel tubes<br />
ICS 77.140.75; 23.040.10<br />
19 EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer<br />
- Part 2: Verification of general and safety requirements<br />
ICS 13.220.10<br />
20 EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up<br />
ICS 13.110<br />
21 EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection -<br />
Part 2: Basic concepts and methodology for mining<br />
ICS 13.230; 73.100.01<br />
8
Change language